-
Crankshaft Key (Woodruff Key) Crankshaft keys (also called woodruff keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...$1.54 -
Crankshaft Scraper (Full Perimeter) During regular engine operation, a significant amount of oil adheres to or becomes entrained in, a cloud surrounding the spinning bottom end. This oil eats up the horsepower your engine is making by increasing the...$74.12 -
Large Oil Galley Plug (3/8"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two, one goes in the front of the block, and one goes in the rear of the block. LC Engineering...$2.03 -
Medium Oil Galley Plug (1/4"-19 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need four of these for the crankshaft and one for the inside of the block under the oil filter...$2.01 -
Small Oil Galley Plug (1/8"-28 BSPT) Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off. You will need two for the passenger side of the block. LC Engineering can supply you with all these hard to...$1.54 -
Pro Stroker Crankshaft LC Engineering's stroker cranks are first sent through our inspection department to find any imperfections. After they pass the initial evaluation, they are Magnaflux inspected to verify the condition of the core. The crank is...$1,004.11 -
LC Engineering Street Crankshaft (+.010" Main / +.010" Rod) LC Engineering is proud to present our new Street Performer Crankshafts. We have spent years chasing core crankshafts to rework to our street performer crankshaft needs, But now we have taken...$399.95 -
Rod Bearing Set (Pro Journal / STD / -.001") These ACL Race series bearings provide the dependability it takes to hold up under higher rpm conditions. The unique combination of design, metallurgy, and engineering come together to deliver what drivers...$95.82 -
Rod Bearing Set (0.50mm / +.020″) Clevite 77 bearings are the ones to use in your high-performance engine because of their tri-metal construction, soft lead-alloy outer layer, copper-lead center, and steel backing. Clevite bearings withstand the...$34.64 -
Wristpin Locks (.866" Diameter) This set of wrist pin locks is what is required to hold your connecting rod wrist pins in place. These are essential pieces that should not be overlooked. Always replace wrist pin locks when refreshing your motor...$6.38 -
Wristpin (.866" Diameter) LC Engineering can supply replacement wrist pins and locks for our forged pistons. Wristpins are available in either standard thickness (.120") or "Turbo" version (.155"). These pins are designed to fit our forged pistons...$18.49 -
Turbo Wristpin LC Engineering can supply replacement wrist pins and locks for our forged pistons. Wristpins are available in either standard thickness (.120") or "Turbo" version (.155"). These pins are designed to fit our forged pistons only and are...$19.23
-
fast shipping
Speed Delivery