-
Safety Auto Rod Bearing Set (.25mm / +.010″) When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification, and ready for the...$30.56 -
Oil Pump Bypass (Adjustable) This LC Engineering exclusive adjustable oil pump pressure bypass, screws into the oil pump housing and will allow you to override the factory bypass spring to allow external adjustment of oil pressure. For your application...$28.87 -
8" Oil Dipstick Tube (Shorty Style) This is a brand new oil pan dipstick tube. OEM part, direct from Toyota! Don't look any further for a new replacement dipstick tube to replace your old smashed or bent one. OEM Toyota Part #: 11452-35010 NOTE:...$27.30 -
Metal Backed Timing Chain Guides (Dual Row) Used on all 20r and 81-82 22r engines from the factory. LC Engineering uses factory OSK metal-backed guides to address the common breakage problem of the plastic guides on 83-84 factory single row engines...$26.73 -
Timing Cover Hardware (Dual Chain Applications) Timing Chain Bolt Kits for the early dual-row cover or the LC Engineering dual row conversion kit. All Hardware is zinc plated, or black oxide coated. This is the hardware used in the Timing Chain...$26.73 -
Timing Cover Hardware (Single Chain Kit) This kit is all the hardware you will need for the installation of the late model Timing Chain Cover in most applications. All hardware is zinc plated, or black oxide coated. NOTE: This kit will not address any...$26.73 -
Gasket Set (Timing Chain Cover) High-quality timing cover gasket set for (85-95) 22R and 22RE engines. Does not fit early (75-84) blocks, for those engines, use Part #: 1015045. Contact our Tech Support Line for further information at...$26.23 -
Oil Pump Drive Spline (Single Row) If you're replacing the single timing chain on your early Toyota motor (83-84) with the more desirable dual-row chain, you will need a dual row drive spline to make it all work right. OEM Toyota Part #:...$24.46 -
Safety Auto Rod Bearing Set When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...$23.64 -
Engine Rebuild Oil Galley Plug Kit Every 20R/22R/RE/RET block and crankshaft have numerous oil port locations that need to be plugged off after cleaning. LC Engineering can supply you with all these hard to find plugs. Most engines have some sort of...$23.51 -
Turbo Wristpin LC Engineering can supply replacement wrist pins and locks for our forged pistons. Wristpins are available in either standard thickness (.120") or "Turbo" version (.155"). These pins are designed to fit our forged pistons only and are...$19.23 -
Front Balancer Bolt We recommend replacing the balancer bolt any time you remove the harmonic balancer. Cheap insurance to avoid problems down the road. This is the OEM bolt with a large flange. It is recommended to use Anti-seize when installing...$19.16
-
fast shipping
Speed Delivery