Fuel Injector O-Rings Located on the fuel rail end of the injectors. LC Engineering suggests changing these when rebuilding or servicing the engine or the manifold assembly. LC Engineering flow-matched fuel injectors include new o-rings in the kit...

Teflon Base Gasket Teflon heat isolators keep the power-robbing heat away from the intake air. This is the ultimate for improving mileage and performance for the price. Contact our Tech Support Line for further information at 928-575-2174...

Labor for Drilling & Tapping For Nitrous (22R Sidedraft Manifold) LC Engineering offers a variety of services for all of our valued customers. Each department specializing in its own product line. Whether it's our full CNC machining department, our...

Idle Cut-off Solenoid This solenoid threads into the Electric Choke version of the Weber 32/36 carburetor and closes off the flow of fuel in the idle circuit when the ignition is cut. Contact our Tech Support Line for further information at...

Mechanical Fuel Pump The fuel pump is a very important part of your vehicle. If you do not have the proper fuel pressure or volume you can starve the engine and cause major engine damage. The best way to cure this problem is to replace that worn-out...

Accelerator Pump Jet Replacement accelerator pump jet for the Weber DCOE (Sidedraft) carburetor. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...

Throttle Body Extension (40mm) Use these extensions to provide a mounting surface for an air filter baseplate, beyond the fuel rails on 2900, 2930 and 3000 series throttle bodies. These components can also be used to extend the effective length of an...

Throttle Position Sensor (Sidedraft) Throttle position sensor for converting to sidedraft throttle body injection. If you would like to connect it to the wiring harness, see Part #: 1061095. NOTE: This throttle position sensor will not mount or...

Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate...

ORB -06 Plug Fitting (Each) Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any...

Fuel Pressure Gauge Kit (Low Pressure Only/Liquid Gauge) If you are running a Weber carburetor on your Toyota truck, this kit is a must-have and a great way to keep your fuel system running right. Weber carbs work best in the 2.5-3psi range. This kit...

Remote Fuel Pressure Regulator Line (-6JIC AN) Have you decided to upgrade to a killer Aeromotive Fuel Pressure Regulator? This line is for connecting your upgraded Aeromotive FPR for your 22re. That regulator is physically a bit bigger than the...