Distributor Shaft O-Ring O-ring that seals the distributor shaft to the cylinder head. Keeps oil from leaking out and debris from getting in and contaminating the oil system. Contact our Tech Support Line for further information at 928-575-2174...

Teflon Heat Isolation Gasket (Intake) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate for...

Teflon Heat Isolation Gasket (Throttle Body) Teflon Heat Isolator kits keep the power-robbing heat away from the intake air. By keeping the heat out of the intake manifold, the incoming air is cooler, therefore making more power. This is the ultimate...

Front Balancer Seal New OEM quality harmonic balancer seal. Eliminate those pesky front oil leaks by replacing the old brittle seal with this new high-quality seal. OEM Toyota Part #: 90311-32020 Contact our Tech Support Line for further...

Brass Freeze Plug Set (7) At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to...

Manifold Gasket Set (Intake & Exhaust) Manifold gasket set includes both intake and exhaust manifold gaskets. OEM quality gaskets provide the best possible. Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and...

Rear Main Seal Housing Gasket OEM quality replacement gasket for the rear oil seal housing for 4AG engines. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs with high-quality LC Engineering...

OEM Rear Main Seal OEM quality replacement rear main seal for 4AG engines. Over time these seals become weak and start to leak. Replace a leaky or damaged seal before severe damage occurs. OEM Toyota Part #: 90311-70007 Contact our Tech Support...

OEM Water Pump Gasket Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...

Base Gasket (Pair) Avoid or fix annoying vacuum leaks by replacing the base gaskets between your carburetor and intake manifold. We recommend this genuine Red Line Weber gasket to be replaced any time the carburetor is removed from the manifold...

Heater Tube O-Ring (Under EFI Manifold) The O-ring seals the heater tube under the EFI intake manifold. Over time O-rings become brittle and break. Replace a leaky or corroded O-rings before severe damage occurs. This is OEM toyota part and may not...

OEM EGR Crossover Gasket OEM Gasket for that EGR Crossover plate located on the back side of the cylinder head. OEM Toyota Part #: 11182-35050 Contact our Tech Support Line for further information at 928-575-2174. Note: Images...