TOP END

+1MM Exhaust Valve (Inconel / 32.50MM) These valves are 1MM larger than stock (stock valves are 31.50MM), and great for ported street heads. These Inconel valves are lighter than the stock steel valves and are extremely heat resistant; These are a...

Valve Keepers (Hardened) For high lift cams, it is recommended to use hardened valve keepers. LC Engineering carries hardened valve keepers for all 20R/22R/22RE valves using stock Toyota retainers as well as our Pro Series Titanium retainers. A must...

Cam Follower (35mm / Shim Under Bucket) These 35mm cam buckets are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of...

Cam Follower (Shim Under Bucket) These 34mm Cam Followers are designed for use with larger profile cams in your 2RZ or 3RZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of the...

Cam Follower (Shim Under Bucket) These 31mm Cam Followers are designed for use with larger profile cams in your 2RZ, 3RZ or 5VZ engine. The larger outside diameter allows the cam profile to be much larger without the cam lobe rolling off the edge of...

OE Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...

Valve Cover Gasket Set These valve cover gaskets feature precision edge-molded silicone rubber, which resists high heat and delivers reliable sealing on irregular surfaces. This silicone rubber is wrapped around a rigid carrier that adds strength to...

Street Performer Retainers Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain, these retainers...

Street Performer Retainer (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...

Intake Valve (Stainless Steel w/ Anti Friction Coating / 38.5mm - +1mm) These valves are 1MM larger than stock, great for ported street heads that don't need the huge 2.5mm oversized valves. These stainless steel valves are lighter than the stock steel...

OEM PCV Hose This is the OEM 22R PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-38011 This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

Fuel Pump Eccentric (Modified) If you are using our adjustable cam gear and a mechanical fuel pump then you will notice that the fuel pump eccentric interferes with the adjustable cam gear bolts. Well not to worry we have what you need to make this...