INTAKE

S&B Stock Replacement Filter (W-2443) With the high cost of a decent stock style paper filter, why not consider a higher flowing cleanable cotton filter? S&B's filters are made with silicone in all the places the competition uses Urethane...

S&B Filter Wrap (WF-1034) This filter wrap is made specifically for the oval filter on S&B's CAI for 2007-2012 Sequoia 5.7L and 2007-2018 Tundra 5.7L. Filter wraps act as a sort of pre-filter, and can prolong the life of your dry or cotton...

Weber Electric Choke This part is used to replace your old or faulty Electric Choke on a Weber Carb. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...

S&B Stock Replacement Filter (W-2605-1) With the high cost of a decent stock style paper filter, why not consider a higher flowing cleanable cotton filter? S&B's filters are made with silicone in all the places the competition uses Urethane...

Foam Float This float is an improved version from the plastic and older brass style floats. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Weber Stock Air Cleaner (Replacement) This is a replacement air filter assembly for the Weber Downdraft 32/36 or 38 carburetors and contains chrome top and bottom, air filter, clips and hardware for a complete installation. NOTE: This is a...

DCOE Jet Cover (w/ Wing Nut) LC Engineering offers only genuine Weber/Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment. Contact our Tech Support Line for further...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Throttle Body Rebuild Kit Have an old worn out throttle body? Well, you are in luck! We have developed this kit that includes a new throttle body gasket, new shaft seals, and LC Engineering's own idle speed screw so you can rebuild yours. Call and...

-6AN Fuel Rail Fitting (Aftermarket Fuel Regulator) Need to connect your Aftermarket Fuel Pressure Regulator to your fuel rail? LC Engineering offers this fitting that goes right into your own fuel rail on your 22RE/22RET. With this fitting there is no...

Coolant Temperature Sensor (Square Plug) This Temperature Sensor is a stock replacement for 22RE engines. After years of use, electronic components can go bad and give false readings, that is why we recommend replacing them with new ones for accurate...

Fuel Pressure Bolt Kit Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel bolt kit is the solution to the problem. This kit will replace the banjo bolt on the cold start...