INTAKE

Carb Linkage Kit This kit contains the vital components needed for converting to a Weber 32/36 or 38 carburetor. Comes with linkage brackets, fuel feed nipples, hoses, and clamps. Contact our Tech Support Line for further information at...

S&B Stock Replacement (66-2050) With the high cost of a decent stock style paper filter, why not consider a higher flowing cleanable cotton filter? S&B's filters are made with silicone in all the places the competition uses Urethane rubber. The...

Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. NOTE: This is a part for the Pro Fuel Injection (SDS) setup we offer, not factory set-ups. Contact our Tech Support Line for further...

Intake Manifold Plug Kit (Carbureted) This plug kit comes with all the necessary plugs for stock or Offenhauser intake manifolds. The picture shows an Offenhauser manifold with the plug locations. This picture accounts for the most common plug...

Weber Cable Linkage Kit This throttle cable linkage kit allows you to connect your throttle cable to your Weber DGV, DGAV, DGEV, and DGMS carbs. It comes with a return spring and bracket. If you have picked up a Weber that is setup for mechanical...

Idle Cut-off Solenoid This solenoid threads into the Electric Choke version of the Weber 32/36 carburetor and closes off the flow of fuel in the idle circuit when the ignition is cut. Contact our Tech Support Line for further information at...

S&B Stock Replacement Filter (W-2443) With the high cost of a decent stock style paper filter, why not consider a higher flowing cleanable cotton filter? S&B's filters are made with silicone in all the places the competition uses Urethane...

S&B Filter Wrap (WF-1034) This filter wrap is made specifically for the oval filter on S&B's CAI for 2007-2012 Sequoia 5.7L and 2007-2018 Tundra 5.7L. Filter wraps act as a sort of pre-filter, and can prolong the life of your dry or cotton...

Weber Electric Choke This part is used to replace your old or faulty Electric Choke on a Weber Carb. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not...

Foam Float This float is an improved version from the plastic and older brass style floats. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Throttle Body Rebuild Kit Have an old worn out throttle body? Well, you are in luck! We have developed this kit that includes a new throttle body gasket, new shaft seals, and LC Engineering's own idle speed screw so you can rebuild yours. Call and...

Weber Stock Air Cleaner (Replacement) This is a replacement air filter assembly for the Weber Downdraft 32/36 or 38 carburetors and contains chrome top and bottom, air filter, clips and hardware for a complete installation. NOTE: This is a...