Pro Distributor Cap
Unlike regular caps and rotors, the LC Engineering Pro Cap features solid brass inserts for maximum resistance to corrosion and electrical pitting to provide longer life...
Denso 7mm Spark Plug Wires
(Black)
We realize not every engine is a race engine. Don't overspend on features that you can't use. Denso uses the highest quality spark plug wire in the industry. All...
Hall Sensor Mount
This bracket is needed if you are installing our Pro Fuel Injection Systems on a 22RE engine. This mount will locate the Hall sensor in the right location for both the stock...
Coolant Temp Sensor Connector
This coolant temperature sensor connector is a replacement for 1989-1995 22RE applications.
Contact our Tech Support Line for further information at 928-575-2174...
Distributor Plug
This plug is designed to plug the hole in the cylinder head after removing the distributor. This is part of the Pro Fuel Injection setup we offer.
Contact our Tech Support...
Coolant Temperature Sensor
This coolant temperature sensor is a stock replacement for 22RE/RTE engines. After years of use, a sensor can go bad and give false readings to the ECU, that is why we...
Coil Adapter Wire
(20" Long)
Have you updated the ignition on your 20R/22R/22RE/3VZ but haven't gotten around to replacing the distributor yet? No problem, LC Engineering has that special coil wire...
Throttle Position Sensor Plug
(Sidedraft)
This plug is only to be used with sensor, see Part #:
1061090, and is for the individual fuel injection throttle body set up that we sell, see Part #:
D.U.I. Distributor Rotor
This is the replacement rotor for the D.U.I. Distributors. Will only work with D.U.I. 4 Cylinder Distributors.
Contact our Tech Support Line for further information...
Temperature Gauge Sender
This temperature sender is a stock replacement for 22RE engines. After years of use, electric components can go bad and give false readings to the ECU, that is why we...
Oil Pressure Light Switch
This Oil Pressure Light Switch is a stock replacement for 22RE engines and it is only for vehicles with stock oil pressure light on the dashboard, not for gauge. After...
Injector Harness Adapter
(Denso to Bosch EV1)
This injector harness adapter installs between the stock injector plug and a new fuel injector with no cutting or splicing required. This is the...