Denso Iridium IK22 Spark Plug These 2 step colder plugs are recommended by URD if you are running the 7th Injector upgrade on a Supercharged 5VZ engine. If you are running the stock pulley (Low Boost) on the 5vz supercharger, Magnuson recommends...

Denso Iridium IK24 Spark Plug These 3 step colder plugs are recommended by URD if you are running the 7th Injector and 2.1 pulley upgrade on a Supercharged 5VZ engine. If you are running the stock pulley (Low Boost) on the 5vz supercharger, Magnuson...

Transmission Repair Sleeve Kit Kit Includes: 303 Stainless Steel Sleeve Set Screws & Hex Wrench Oversized Release Bearing Hi-temp Grease Packet Notification Sticker Instructions Replaces: Toyota Part #: 31230-35110 Does your pedal feel like...

Cross Drilled Slotted Rotors A moving vehicle has a large amount of kinetic energy, the brakes have to absorb and dissipate this energy in order for the vehicle to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic...

Cross Drilled Rotor A moving vehicle has a large amount of kinetic energy, the brakes have to absorb and dissipate this energy in order for the vehicle to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic energy to...

Cross Drilled Slotted Rotors A moving vehicle has a large amount of kinetic energy, and the brakes have to remove this energy in order to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic energy to heat generated by...

Front Cross Drilled Rotors (338mm Front Rotor) A moving vehicle has a large amount of kinetic energy, and the brakes have to remove this energy in order to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic energy to...

Cross Drilled Slotted Rotors A moving vehicle has a large amount of kinetic energy, and the brakes have to remove this energy in order to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic energy to heat generated by...

Rear Cross Drilled Slotted Rotors A moving vehicle has a large amount of kinetic energy, and the brakes have to remove this energy in order to stop. How do the brakes do this? Each time you stop, your brakes convert the kinetic energy to heat generated...

OE Wheel Bearing Grease Seal (Front Hub) Fits in the back side of the front IFS hubs, will be needed anytime you repack or replace front wheel bearings. You will need two seals in order to do your truck. NOTE: Not for Solid Axle applications. For...

OE Lower Ball Joint When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest, OE replacement. This is the same ball joint Toyota used on Pickups and & 4Runners back...

Cam Follower Kit (Shim Under Bucket) Cam Followers (or Bucket Lifters) and Lash Caps are designed using the latest CATIA CAD software and Finite Element Analysis (FEA) for the high demanding conditions of endurance racing, road racing or drag racing...