Rod Bearing Set (Pro Journal / STD / -.001") These ACL Race series bearings provide the dependability it takes to hold up under higher rpm conditions. The unique combination of design, metallurgy, and engineering come together to deliver what drivers...

Rod Bearing Set (0.50mm / +.020″) Clevite 77 bearings are the ones to use in your high-performance engine because of their tri-metal construction, soft lead-alloy outer layer, copper-lead center, and steel backing. Clevite bearings withstand the...

Street Rod Bushing Set (4) Any time you remove your connecting rods it is a good idea to change out the piston pin bushings. After a while, the bushings will wear out causing the piston to "walk" in the bore and could eventually cause major engine...

Thrust Bearing Set (Standard) These thrust bearings for the 2RZ and 3RZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on...

Thrust Bearing Set Coated (Standard) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with...

Thrust Bearing Set (Standard) These bearings for the 5VZ and 3VZ engines are factory replacement bearings. These factory replacement bearings offer the reliability and durability that you expect from LC Engineering. NOTE: No returns excepted on any...

Wristpin Locks (.866" Diameter) This set of wrist pin locks is what is required to hold your connecting rod wrist pins in place. These are essential pieces that should not be overlooked. Always replace wrist pin locks when refreshing your motor...

Wristpin (.866" Diameter) LC Engineering can supply replacement wrist pins and locks for our forged pistons. Wristpins are available in either standard thickness (.120") or "Turbo" version (.155"). These pins are designed to fit our forged pistons...

Turbo Wristpin LC Engineering can supply replacement wrist pins and locks for our forged pistons. Wristpins are available in either standard thickness (.120") or "Turbo" version (.155"). These pins are designed to fit our forged pistons only and are...

Connecting Rod Set (Pro Journal / Chromoly H-Beam ) When 300 horsepower or more is expected, a stronger rod is recommended. LC Engineering’s Pro Chromoly H-Beam Rods will fit the bill. These H-Beam 4340 Forged Chromoly Steel Connecting Rods are...

Connecting Rod (Toyota Journal / Chromoly H-Beam) Are you about to rebuild your 20/22R/T/E power plant and would like to have something between stock rods and hardcore crossbeams? How about a set of forged H-beams for well under $400? After a couple...

Pro Connecting Rod Bolt To eliminate the chance of rod failure when building your motor, we highly suggest replacing the stock rod bolts. A continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These Pro Rod Bolts...