Pick Up Tube
(Oil Pan)
If you're rebuilding your motor and plan on using the factory pan. It's a good idea to replace the pickup for cheap insurance. Over time, the factory oil pickup tube can accumulate debris that you don't want to take the chance of...
Rear Control & Track Arm Bushings
These bushings maintain proper alignment under extreme conditions on and off-road and during competition. Helps provide quicker steering response and greater vehicle control. Whatever your demands, proper alignment...
OEM Throttle Body Elbow/Hose
(Rubber)
This rubber elbow is an OEM part from Toyota, from the intake to the throttle body. This elbow tends to crack with normal wear and tear, especially in extreme climates.
OEM Toyota Part #: 22231-35030
NOTE: ...
Toytec 1.5" Block & U-Bolts
Kit Includes:
Solid T6 Aluminum blocks with pressed in steel pin.
Includes new u bolts w/hardware, and two blocks.
1.5" lift block kit works with add-a-leafs and/or shackles for an additional 1.5″ of rear lift.
Fits...
Delphi In-Tank Fuel Pump
The electric fuel pump on your vehicle pumps fuel from the fuel tank to the engine and builds fuel pressure for your vehicle’s fuel injection system. The electric fuel pump can be located inline between the fuel tank...
Upper Front Tower Shock Mount Kit
(Low Range Off-Road)
Need to mount up shocks but don't like the typical "tube style" shock hoops? These shock towers are a great alternative and offer a few added benefits compared to other similar products. Originally...
OEM Throttle Position Sensor
Throttle position sensors are switches on the throttle body that keep the engine control computer informed about the throttle opening. The TPS is a variable resistor that changes resistance as the throttle opens wider. The...
Brake Master Cylinder
(1" Bore)
Are you upgrading your brakes from drums to discs? Are you just increasing the rotor size? Either way we both know that the Toyota's stopping power just doesn't seem to be up to today's standards. This brake master...
Total Seal Street Piston Ring Set
(92.00mm / Standard)
LC Engineering's street rings are custom packaged by Total Seal to our requirements. Hastings piston rings are built with ductile iron, plasma moly top compression rings. They have conventional...
Front Leaf Spring Hanger
(W/ Options)
This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits.
Contact our Tech Support Line for further information at 928-575-2174...
LC Short Shifter Kit
You MUST measure your transmission for fitment.
NO RETURNS ACCEPTED ON ANY SHORT SHIFTER KIT
Fitments listed are suggestive. We cannot quote direct fitment to any vehicle, as Toyota changed too much, too often.We have seen factory...
LC Short Shifter Kit (Small Base)
You MUST measure your transmission for fitment.
NO RETURNS ACCEPTED ON ANY SHORT SHIFTER KIT
Fitments listed are suggestive. We cannot quote direct fitment to any vehicle, as Toyota changed too much, too often.We have...