Model

OEM PCV Hose This is the OEM 22R PCV hose for the PCV Valve on top of the valve cover. OEM Toyota Part #: 12261-38011 This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further...

OEM Clutch Fork Boot Keep your clutch components clean with this OEM Clutch Fork Boot. After you find these boots cracked or missing on older trucks, especially on off-road applications. OEM Toyota Part #: 31126-20060 Contact our Tech Support...

Intake Manifold Plug Kit This plug kit comes with all the necessary plugs for a stock 22RE intake manifold when using Stand Alone Engine Management or running Propane. We also include a few extra 3/8" JSPT straight plugs. These are sometimes used in...

Supercharger Bracket Kit (2RZ / 3RZ) LC Engineering now offers a bracket kit for your 2RZ or 3RZ supercharger. This kit comes with everything you need to bolt up your TRD, Alpine or LC Engineering supercharger. Kit Includes: All Hardware "L"...

Inner Spring (GenV CompGate40) All GenV wastegates come with a range of springs (3-26psi). These are Inner Spring options available in these GenV CompGate40 Wastegates. Contact our Tech Support Line for further information at 928-575-2174...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

A/C Idler Belt (1985 - 1989) Pickup & 4Runner 22R/RE/RET This high Performance V-Belt is designed with being a workhorse in mind, the polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The...

Hydro Assist Bracket (OEM Axle Housing / Rock Assault Axle Housing / Tie Rod) Our mounting brackets have a 3/4" or 5/8" bolt hole. The Hydro Assist Brackets are designed to fit a OEM Toyota solid axle front housing, Rock Assault Axle Housings and 1.25"...

S&B Stock Replacement (66-2050) With the high cost of a decent stock style paper filter, why not consider a higher flowing cleanable cotton filter? S&B's filters are made with silicone in all the places the competition uses Urethane rubber. The...

Supercharger Belt Replacement 4-rib supercharger belt for the 22R/RE supercharger kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...

Polyurethane Steering Rack Bushings Tighten sloppy steering on your rack and pinion steering system with this urethane bushing upgrade kit! Simple daily driving wears the factory rubber bushings where the rack system mounts. This causes delayed...

Distributor Plug This plug is designed to plug the hole in the cylinder head after removing the distributor. NOTE: This is a part for the Pro Fuel Injection (SDS) setup we offer, not factory set-ups. Contact our Tech Support Line for further...