OEM Coolant Bypass Union (Elbow)
This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...
2.32" ID Silicone Elbow
(45º / Black)
Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...
2-Bolt Stub Connector
(You Choose Size)
2 1/4" Flange
This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to.
2 1/2" Flange
This...
Merge Collector
(You Choose Size)
You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...
Fuel Injector Cups
(w/ O-Rings)
Fuel Injector Cups and O-Rings for OEM Toyota 2RZ and 3RZ fuel injectors. Located on in the cylinder head for the injectors to sit in. Age and heat will take its toll on these plastic parts. They never come out whole and...
Gasket Set
(Timing Chain Cover)
High-quality timing cover gasket set for (85-95) 22R and 22RE engines. Does not fit early (75-84) blocks, for those engines, use Part #:
1015045.
Contact our Tech Support Line for further information at...
Stock Replacement U-Joint
(Heavy Duty w/ Zerk)
Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up to any task and will handle high output motors and low...
Clutch Slave Cylinder
The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...
Water Bypass Hose
LC Engineering is now offering an OEM water bypass hose.
OEM Toyota Part #: 16261-35030
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images...
Rear Seal Gasket Assembly
High-quality silicone seals with a double lip for improved sealing, includes rear main seal & housing gasket.
Contact our Tech Support Line for further information at 928-575-2174.
Note:...
Water Block Plate Kit
(Cylinder Head-Rear)
This block plate is used primarily on our billet race motors to block off the water passage on the back of the cylinder head.
Contact our Tech Support Line for further information at 928-575-2174...