Thrust Bearing Set (Standard) When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification and ready for the miles to come. We...

Safety Auto Rod Bearing Set When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...

Rod Bearing Set Clevite 77 bearings are the ones to use in your high-performance engine because of their tri-metal construction, soft lead-alloy outer layer, copper-lead center, and steel backing. Clevite bearings withstand the friction, dirt,...

Safety Auto Main Bearing Set When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end.These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...

Main Bearing Set Clevite 77 engine bearings have set the pace for engineering quality. Clevite 77 engine bearings are built above industry standards for strength and durability, even exceeding the highest standards set by heavy-duty engine...

Thrust Bearing Set (Standard) When overhauling/rebuilding an engine, it is highly recommended that you replace all bearings in the bottom end. These bearing sets will get your engine back to the proper specification and ready for the miles to come. The...

Plug Wire Separator Kit (8.5mm Pro Wires) These composite separators are held together with Allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires. They...

MSD-6AL Digital Ignition (W/ Rev Control) The MSD 6AL Ignition Control set the standards that other ignitions strive to reach. In fact, you'll find ignitions from other companies that carry the 6AL name (and in some cases, the same part number). MSD...

MSD Blaster 2 Coil (Hi-Performance) Our famous red canister coil! Great choice with an MSD 6-series ignition. If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, MSD 5, 6, or 7, the...

OEM Head Bolts If you ever remove your cylinder head, you should always replace the head bolts to prolong the service life of your engine. Cylinder head bolts go through a lot of stress, even in stock engines, and retorquing used bolts can sometimes...

Ring & Pinion Set (6.7") These Ring & Pinions are designed to run quiet and last longer than other aftermarket gear sets. They are easy to set up and we make sure that they meet LC Engineering's high standards. What gear ratio do I...

Pro Fuel Injection Plate Kit Custom plates and adapters needed to install our Pro Fuel Injection kits on a 22R/RE engine. Plate Kit #1 Includes: Water block off plate Air temp sensor plate EGR block plates MAP sensor mount plate All hardware...