Celica

Vinyl Decal Set (22R Motor & Monster 4Runner) Decals increase horsepower! Not really, but you can show the person behind you why you're in front! New limited edition old school Toyota decals. Contact our Tech Support Line for further...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...

Rear Main Seal Housing Gasket This gasket seals the rear main seal housing to the block on 20R-22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

T-stat Housing Adapter O-Ring (Offenhauser Manifolds) If you are running an Offenhauser intake manifold you are most likely using our thermostat housing adapter with a late style water neck. The adapter has its own O-ring (other than the one around the...

PCV Grommet New PCV grommet for valve cover on 20R, 22R, and 22RE engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

OEM Locator Ring Dowel (Rocker Arm Assembly) Dowel pins and Ring dowel pins play a very important part in an engine build. If not utilized, they can lead to devastating problems with endless headaches. The tolerances on these pins are measured in...

Distributor Shaft O-Ring O-ring that seals the distributor shaft to the cylinder head. Keeps oil from leaking out and debris from getting in and contaminating the oil system. Contact our Tech Support Line for further information at 928-575-2174...

Exhaust Clamp (2 1/2") This 2-1/2" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Distributor Cap O-Ring This distributor cap O-ring seals the sensitive components inside the distributor from moisture and other contaminants from finding their way under the cap. Contact our Tech Support Line for further information at...

Throttle Linkage (Nut & Tab Washer) Have you lost your linkage bracket nut? No stress LC Engineering has you covered. We offer this kit to make your life a little easier. It will include one M8 x 1.0 nut as well as one Tab Washer to keep it from...

22RE Fuel Pressure Damper Washer This fuel damper washer is a stock replacement for the worn out one. You will need (1) as well as (1) of these 1025050 washers for each damper. NOTE: Sold individually. Contact our Tech Support Line for further...

OEM Distributor Hold Down Bolt As we all know, we tend to lose or misplace at least one bolt or nut when we are working on our vehicles. Well if you misplaced or damaged the distributor bolt, don’t worry we have you covered! This is an OEM...