Coolant Temp Sensor
This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector.
Contact our Tech Support Line for further information at...
Fuel Filter
LC Engineering carries fuel filters for your Toyota. One of the most commonly overlooked tune-up components is your fuel filter. When you consider factors like a 15 to 25 year old metal gas tank with debris inside it, junk gasoline, and...
Exhaust Valve
(Stainless Steel / Stock Size 27.5mm)
These stainless valves are the highest level of sophistication in valve technology. Extremely heat resistant and designed for use in race engines that are subjected to extreme temperatures, such as...
Intake Valve
(Stainless Steel / Stock Size 34mm)
These stainless valves are the highest level of sophistication in valve technology. Extremely heat resistant and designed for use in race engines that are subjected to extreme temperatures, such as...
3.00" ID Silicone Elbow
(45º / Black)
Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...
Intake Valve
(Stainless Steel w/ Anti Friction Coating / 37.5mm - Stock Size)
If you are replacing the factory valves but want something better without going oversized, these swirl-polished valves have all of the features of our oversized valves but...
OEM PCV Valve Hose
This is an OEM Toyota 3VZ hose for your PCV valve.
OEM Toyota: 12261-65010
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not...
Thermostat
(180 Degree)
Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...
Brass Freeze Plug
At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...
Brass Freeze Plug Set
When completing any engine rebuild, the block needs to be cleaned. To be thorough, when cleaning out your block, all of the core plugs must be removed to allow complete access to areas that carry oil or coolant. There are a few...
Blow Off Valve Weld On Fitting
(Race Port)
This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves only. This adapter will not fit our Kompact series, Vee...
Thermostat
(180 Degree)
Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...