K&N Air Filter Oil (99-0533) K&N 99-0533 is an 8 ounce squeeze bottle of air filter oil. K&N Air Filter Oil is the only oil specially formulated to work in combination with the cotton fabric in K&N air filter elements providing a superior air...

Flexplate Bolt Kit (OEM) Connect that flexplate with confidence. These OEM flexplate bolts are just what the doctor ordered to connect your flexplate to your engine. They have a black oxide finish to help resist rust and corrosion. Recommended to be...

Oil Fitting (28BSPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block. This is a steel fitting that will come in a silver or...

Intake Valve (Steel / Stock Size 37.5mm) These are replacement steel valves for use on the stock seats. Perfect for stock applications where an oversized stainless steel valve is not needed. These are OEM quality steel valves that are the stock size...

Exhaust Valve (Steel / 30.5mm - Stock Size) These are replacement steel valves for use on the stock seats. Perfect for stock applications where an oversized stainless steel valve is not needed. These are OEM quality steel valves that are the stock...

5/8" High Temperature Hose (Order By The Foot) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 5/8" hose is perfect as an oil drain line for your turbocharger. Sold by the foot if...

Pressure Plate Bolt Pressure plate bolts play an important role in the performance and safety of race cars and street machines alike. That's why LC Engineering recommends replacing yours whenever you change your pressure plate. OEM Toyota Part #:...

Weld-On Oxygen Sensor Flange (2-Bolt Flange Style) This flange is made from 3/8" mild steel, then tapped for M8 x 1.25 studs weld on. For the 2 bolt style O2 sensor. NOT for thread-in O2 sensors. Contact our Tech Support Line for further...

Intake Manifold Stud Kit This kit comes with all new studs to mount your manifold to your cylinder head. Replacing your stock intake bolts with studs will allow you to remove and reinstall your manifold numerous times without having to worry about...

Plug Wire Separator Kit Pro Wires (8.5mm) - Black These composite separators are held together with allen head screws which are mounted flush within the loom. These separators are designed specifically to work with our billet wire loom and LC Pro Wires...

Street Distributor Rotor Replacement distributor rotor for (95-98) Toyota Tacoma trucks. The distributor rotor rotates inside the distributor and transfers the high tension current from the coil to the towers of the distributor cap. The firing end of...

Rubber Tailpipe Hanger (2-Hole) Factory replacement rubber insulator for tailpipe. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent the...