Street Tune-up Kit A tune up kit that won't break the bank for your 2RZ or 3RZ from LC Engineering. Give your late 1998-2000 2RZ/3RZ an ignition tune up with our kit that includes four NGK spark plugs BKR5EYA and a set of NGK Spark Plug Wires. Not For...

Rod Bearing Set (Coated) Using CT-1 coated engine bearings is proven to reduce catastrophic engine failures dramatically. Engines incorrectly plumbed or suffering from low or no oil pressure, cold starts, low or no flow have survived with little or no...

Oil Pump Cover OEM oil pump cover for 3RZ. LC Engineering recommends replacing the cover anytime you have experienced debris going thru the motor or a catastrophic failure. OEM Toyota Part #: 15115-75020 NOTE: For 2RZ/3RZ oil pump cover allen...

Pro Injection Plate Kit Custom-made block plates and adapter plates needed to install our Pro Fuel Injection kits on 2RZ and 3RZ motors. Plate Kit #1 Includes: EGR block plates MAP sensor mount plate Water temp sensor (inline radiator hose...

Balance Shaft Bearings Replacement balance shaft bearings for 3RZ or 2TR engines. NOTE: Sold as a set of (4). Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Differential Drop Spacer Kit (Rear Sway Bar) Reduce body roll, understeer, and generally sloppy handling with one of these Addco anti-sway bar kits. The bar is made from high-carbon steel and is hardened and stress-relieved to give your suspension...

NGK Spark Plug Wires We realize not every engine is a race engine. Don't overspend on features that you can't use. The NGK spark plug wires are perfect for the street were high RPM's are not sustained and upgraded ignition are not used. NGK Resistor...

Supercharger Belt Look no further; we offer the highest quality belts for your supercharger. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may not represent...

Pro Fuel Injection Plate Kit When installing our LC Pro Fuel Injection System on a 5VZ (3.4 V6), this is the set of mounting plates for vital components to make installation much easier. Plate Kit #1 Includes: MAP sensor mount plate Water temp...

Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Outer Tie Rod End (Drivers Side) Time to replace those worn out stock tie rod ends? LC Engineering now carries a full line of tie rod ends for your Toyota truck. These high quality steering components are made to meet or exceed OEM performance and...

Front Sway Bar Bushings (25mm) Improved handling, low cost, and easy installation are just some of the reasons these components are so popular! These sway bar bushings offer the greatest improvement in performance handling on trucks and sport utility...