Tundra

J-Bend 409 Stainless Steel / .065 Wall (Choose Your Size) LC Engineering sells stainless tubing for your project. 409 is the most inexpensive and available stainless steel in the 400 series. It is suitable for normally aspirated header applications and...

Header Stud Set The factory exhaust manifold studs have a shoulder in the center that can interfere with proper header tightening. Our 10mm x 1.25 x 48mm long, heat-treated plated header mounting studs are stronger than stock. Kit Includes: (12)...

Exhaust Valve (Stainless Steel / Stock Size 27.5mm) These stainless valves are the highest level of sophistication in valve technology. Extremely heat resistant and designed for use in race engines that are subjected to extreme temperatures, such as...

Intake Valve (Stainless Steel / Stock Size 34mm) These stainless valves are the highest level of sophistication in valve technology. Extremely heat resistant and designed for use in race engines that are subjected to extreme temperatures, such as...

3.00" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

Brass Freeze Plug At the beginning of any complete engine build-up, the block needs to be cleaned. To do that, all of the block's plugs must be removed (even with a new engine) to allow cleaning access to areas that enable oil or coolant to flow. LC...

Blow Off Valve Weld On Fitting (Race Port) This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves only. This adapter will not fit our Kompact series, Vee...

Thermostat (180 Degree) Reduced engine temperatures add life to your engine and provide a denser air/fuel mixture which helps produce more horsepower. Consistent control of engine temperature allows an engine to operate at its peak efficiency, no...

OEM Flywheel Bolt Connect that flywheel with confidence. These OEM flywheel bolts are just what the doctor ordered to connect your flywheel to your engine. They have a black oxide finish to help resist rust and corrosion. OEM Toyota Part #:...

Stock Replacement U-Joint (Heavy Duty w/ Zerk) Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up to any task and will handle high output motors and low...

Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...

2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...