-
OE Upper Ball Joint When it comes to ball joints, there are a lot of options out there, but there is only one that performs better and lasts longer than the rest, OE replacement. This is the same ball joint Toyota used on Pickups and & 4Runners back in...$67.29 -
Spring Hangers (Sloped / Welded) Installing longer rear springs requires moving the rear spring hangers forward on the frame. The factory hangers are too thin to cut off and reuse. These hangers weld under the frame, forward of the stock units. Holes...$60.50 -
Leafspring Bumpstops (w/ Extensions) Bumpstops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. Bumpstops are 2" wide by 5 1/4"...$49.99 -
Creeper Joints (1″ Thread / 9/16" Right Thread) These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball...$49.99 -
Toytec 7.5" U-Bolt Set Features: Longer U-Bolts for lift blocks or springs. Will also work with stock springs. High quality Zinc Plated Steel. Can be cut to length. Complete with hardware as Shown. NOTE: If your truck has 3.25" ID rear U-bolts,...$49.67 -
Toytec 9" U-Bolt Set Features: Longer U-Bolts for lift blocks or springs. Will also work with stock springs. High quality Zinc Plated Steel. Can be cut to length. Complete with hardware as Shown. NOTE: If your truck has 3.25" ID rear U-bolts, this...$49.67 -
Rock Assault 6-Ply Limit Strap (You Choose Length) Trail-Gear introduces the industry's first 6-layer, 1.75" nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that have been zinc-plated for corrosion-resistance...$43.51 -
Trail-Link Four Axle 20 Degree Lower Link Mount (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a...$40.23 -
Lower Shock Mounts These shock mounts are designed to weld directly onto the axle housing. These mounts can be used on front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or...$39.99 -
Leaf Spring Frame Tubes Frame Tubes install into IFS style frame for mounting leaf springs. Accepts stock Toyota front bushings. Jigs are used for positioning tubes in frame. This product should not be used in a manner that violates Federal EPA Laws...$39.99 -
Track Bar Axle Mount Leaf springs can "wrap up" under the torque of rock crawling. Low gears and flexible springs are more susceptible to this effect. For most trail rigs, the wrap up does not present a problem. For those tackling the top trails and...$39.99 -
Leafspring Bumpstops Bump Stops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. NOTE: Bump Stops are 2" wide by 5 1/4" long...$39.99
-
fast shipping
Speed Delivery