Pro Cylinder Heads Set 3VZ V6 With Out Cams

Pro Cylinder Head Set

(w/o Camshafts)

Finally a performance cylinder head option for the 3.0L (3VZ V6). Now LC Engineering gives you the ability to install a set of performance cylinder heads on that engine and WAKE IT UP. We start with a brand new set of bare heads, and then our cylinder head experts port them to get the most potential out of your engine. We then install stock sized steel exhaust and intake valves. The head is then fitted with LC Engineering exclusive Street Performer valve springs.

These spring provide a higher spring pressure along with a smaller diameter wire to allow the use of a higher lift cam without any coil bind issues. The valve train is finished off with Viton valve seals, hardened keepers, new Street Performer retainers and an exhaust stud kit so you can replace those old worn out exhaust studs. No longer will you need to bother with trying to get a set of old heads machined flat to keep from blowing head gaskets!

These heads have a perfectly flat surface, providing a perfect head gasket seal for years of problem-free service. If you are looking for a less expensive alternative, you can look into our Street Performer version if you are building on a budget (check out Part #: 1021080).

LC Engineering also offers our exclusive head stud set (Part #: 1024065) and our MLS head gaskets (Part #: 1024040 or Part #: 1024059) or you can get a complete kit with studs and an MLS head gasket set (Part #: 1024050).

NOTE: Customer will re-use their cams and buckets.

3VZ Street Performer Cylinder Heads Parts List:

• Brand new bare head castings 1021081 and 1021082
• Steel intake valves (stock size) 1023070
• Steel exhaust valves (stock size) 1023071
• Street Performer valve springs 1023238
• Viton valve seals 1023237
• Street Performer Valve Spring Retainers 1023239
• Hardened valve keepers 1023235
• Exhaust stud kit 1045031