Street Performer Cylinder Heads Without Cams 3VZ 3.0 Liter
LC Engineering has designed a perfect replacement for the 3.0L (3VZ V6) customer who is on a tight budget. These budget minded heads start with a brand new casting and then our cylinder head experts fit them with all brand new components (see below for a complete list of parts). We use stock sized steel intake and exhaust valves. The head is then fitted with LC Engineering exclusive Street Performer valve springs. These spring provide a higher spring pressure along with a smaller diameter wire to allow the use of a higher lift cam without any coil bind issues. The valve train is finished of with Viton valve seals, hardened keepers, new Street Performer retainers and an exhaust stud kit so you can replace those old worn out exhaust studs. No longer will you need to bother with trying to get a set of old heads machined flat to keep from blowing head gaskets! These heads have a perfectly flat surface, providing a perfect head gasket seal for years of problem-free service. To keep the price down these heads are not ported but we do offer an alternative option if you are looking for a more performance oriented cylinder head (check out part #1021083).
LC Engineering also offers our exclusive head stud set (part #1024065) and our MLS head gaskets (part #1024040 or part #1024059) or you can get a complete kit with studs and a MLS head gasket set (part #1024050).
3VZ Street Performer Cylinder Heads parts list:
1021081 & 1021082 Brand new bare head castings
1023070 Steel intake valves (stock size)
1023071 Steel exhaust valves (stock size)
1023238 Street Performer valve springs
1023237 Viton valve seals
1023006 Street Performer retainers
1023235 Hardened valve keepers
1045031 Exhaust stud kit
CUSTOMER WILL RE-USE THEIR CAMS AND BUCKETS
Contact our Tech Support Line for further information at 928-855-6341.
for New Products, Tech Articles,
Specials & Monthly Newsletters!