Suspension Lift & Lower Components

Trail-Link Four Axle 20 Degree Lower Link Mount (You Choose Side) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a...

Leafspring Bumpstops Bump Stops are used to prevent over-flexing of leaf springs and shocks. Bumpstops can be bolted or welded in place. We recommend welding bumpstops to top of the u-bolt flip kit plate. NOTE: Bump Stops are 2" wide by 5 1/4" long...

Panhard Link Frame Bracket (Front 3-Link) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Toytec Axle Degree Shims These 3 degree shims bolt to the bottom of your leaf pack using the included new leaf spring center bolts. Axle degree shims are ideal for Add-A-Leaf and Leaf Pack installs to minimize or eliminate rear drive line vibration...

Trail-Link 3 Front Shock Strap (Compressed / Extended) Individual Trail-Link Three™ Front 3-Link strap. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images may...

Torsion bolt kit (4WD ONLY) (OEM) When you change or are adjusting the torsion bars it's a good idea to have new hardware. Years of use and extremely long threads on these bolts could get damaged and unusable. if you're changing the torsion bars on the...

Differential Drop Spacer Kit (w/o Sway Bar) One thing often overlooked when lifting an IFS truck is the differential and axles. Most larger lifts will drop the differential down with brackets, but with smaller lifts (torsion bar lift, ball joint...

Leafspring Bumpstop Extensions When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame...

Differential Drop Spacer Kit (Rear Sway Bar) Reduce body roll, understeer, and generally sloppy handling with one of these Addco anti-sway bar kits. The bar is made from high-carbon steel and is hardened and stress-relieved to give your suspension...

Differential Drop Spacer Kit Lifting a Tacoma, Tundra, Sequoia or 4Runner increases the angles on the CV joints and boots, which accelerates wear. These solid aircraft-grade 6061-T6 aluminum spacers and zinc-plated Grade 8 hardware move the front...

Upper Link Axle Bracket (3-Link / Front) Built out of 3/16" Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brackets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system...