Oil Pump
New 5VZ oil pump. OEM quality replacement part.
NOTE: Does not include any gasket or seal. Will not work on T100 Trucks. For Front Seal, See Part #: 1015044. For T100 5VZ Oil Pump, See Part # 1016094.
Contact our Tech Support Line for...
Timing Belt Cover
This is a new OEM replacement cover for the 5VZ V-6 timing belt. It is recommended to be replaced when you replace the timing belt. LC Engineering decal now included! Horsepower increase not guaranteed, but looking cool is!
OEM Toyota...
Timing Kit w/o Gears
(Belt, Tensioner, Idler)
LC Engineering has a complete timing belt kit for your 4.7L V8! The kit includes a heavy-duty timing belt, new tensioner assembly and even a new idler pulley, everything you need to change out the belt on...
Remote Push-Button Activation Switch
(Water Resistant)
The remote push button switch (water resistant) enables enthusiasts to activate solenoids, fuel pumps, and most anything else, while safely protecting the switch from water damage.
Contact...
Magnuson Supercharger Oil Service Kit
(Black Body)
Magnuson Superchargers have their own sealed oil reservoir that doesn't use the engine's oil so it makes them very low maintenance. Magnuson recommends the oil be checked by 60k Miles and changed by...
Oil Pump Assembly
This is a new quality replacement oil pump assembly for the 4.7L V-8.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may not represent the...
Oil Filter Remote Kit
This remote oil filter relocation kits allow you to locate your oil filter where you want it for more convenient oil changes and increased engine oil capacity. These complete kits include everything you need for easy installation:...
Oil Pick Up Tube 3.4L V6 (5VZ-FE)
(Rear Sump Oil Pan)
If you're rebuilding your motor and plan on using the factory pan. It's a good idea to replace the pickup for cheap insurance. Over time, the factory oil pickup tube can accumulate debris that you...
10 oz. Standard Bottle Bracket
NOS brackets are designed to securely hold your Nitrous bottle at the proper angle for maximum flow through the siphon tube. Standard brackets available made of steel with black vinyl coating.
Contact our Tech...
"Boost Tee" Boost Controller
(You Choose Color)
By far the easiest and most cost-effective way of controlling the amount of pressure going to the wastegate is via a Gated Boost Control Valve. All Turbosmart Gated Boost Controllers are manufactured...
OEM Connecting Rod Bolt
To eliminate the chance of rod failure when building a budget or stock motor we highly recommend replacing the rod bolts. At continuous high rpm, the stock bolts will stretch, and rod bearing or rod failure occurs. These rod...
Water Pump
(w/o Cooler Tube)
When rebuilding your engine or replacing the timing belt, it is always a good idea to include a new water pump. These are all new OEM quality Japanese-manufactured pumps. This pump will not have the auxiliary tube for the...