1979

8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...

Shift Detent Bolt (Heavy Duty Transfer Case) The stock transfer case shift springs tend to give a sloppy feel to the shifters and can lead to the transfer case shift lever popping out of gear on the trail. We recommend heavy duty shift springs be used...

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Clutch or Brake Pedal Cover Are your clutch and brake pedal covers worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on manual transmission vehicles or clutch pedals on 1979-1995 Toyota Pick-Ups, 4Runners &...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Oil Drain Plug (14mm X 1.50 Replacement Aftermarket Pan) This LCE 20R/22R replacement oil drain plug is used for some aftermarket oil pans. Specifications 17mm Head N14-1.50 Thread Pitch NOTE: Gasket is not included, see Part #: 1013116 for...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Crankshaft Key Set (Woodruff Key) Crankshaft keys (also called Woodruff Keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...

Rear Main Seal Housing Gasket This gasket seals the rear main seal housing to the block on 20R-22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

PCV Grommet New PCV grommet for valve cover on 20R, 22R, and 22RE engines. Be sure to replace the grommet whenever you replace the PCV valve. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...