1981

Total Seal Pro Piston Ring Set (94.00mm / +.080") LC Engineering's Pro Rings are custom packaged by Total Seal to our requirements. This type of ring set is standard equipment on all our piston kits. The Pro Rings include Total Seal's Moly Max Ductile...

Complete Gasket Set Head gasket failure is one of the most common problems with the Toyota four-cylinder engines. With a cast iron block and an aluminum cylinder head, add a little heat, and you have two entirely different metals expanding and...

Pick Up Tube (Oil Pan) If you're rebuilding your motor and plan on using the factory pan. It's a good idea to replace the pickup for cheap insurance. Over time, the factory oil pickup tube can accumulate debris that you don't want to take the chance of...

Rear Axle Bearing Service Kit (One Kit Per Side) Kit includes all of the normally replaced parts for servicing left or right rear axles. Kit Includes: Koyo or Schaeffler/FAG axle bearing (Brand depends on availability) axle housing seal axle...

Underdrive Pulley (4" Double Groove) Underdrive pulleys are an excellent addition for just about any high RPM performance application. The lightweight of these billet aluminum pulleys will reduce the drag on your engine, while the underdrive design...

Brake Master Cylinder (1" Bore) Are you upgrading your brakes from drums to discs? Are you just increasing the rotor size? Either way we both know that the Toyota's stopping power just doesn't seem to be up to today's standards. This brake master...

Front Leaf Spring Hanger (W/ Options) This hanger is used to as a front mount for our 47" front leaf springs. Hanger is included in IFS Eliminator and Classic Lift kits. Contact our Tech Support Line for further information at 928-575-2174...

MLS Head Gasket (.040" Over x .051" Thick) The cylinder head gasket is arguably the most important seal in an automotive engine. Since the release of the internal combustion engine, gasket designers have specified many materials to meet this critical...

Flat Pitman Arm Solid one piece design. Features FJ80 tapered hole. Extra strong and wide, one piece, forged design. Ideal for use with crossover steering. Your choice of flat arm or drop arm.  The flat arm has no drop.  The drop arm has same...

Stock Drop Pitman Arm This Stock Drop Pitman Arm is a solid one piece, forged design, and features a FJ80 tapered hole. For use with crossover steering and features the same drop as the factory pitman arm. This product should not be used in a manner...

Pick Up Tube (Oil Pan) If you're rebuilding your motor and plan on using the factory pan, it's a good idea to replace the pickup for cheap insurance. Over time, the factory oil pickup tube can accumulate debris that you don't want to take the chance of...

Haltech iC-7 Moulded Panel Mount Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. That's where this plate comes in, it makes life EASY if you have a custom build and would like to have that...