1981

Pro Rocker Shaft Set Since Toyota has discontinued the sale of its rocker shafts, we have been determined to bring an OEM or better quality shaft back to the market. We've partnered up with the original manufacturer in Japan to bring these shafts that...

Mechanical Fuel Pump The fuel pump is a very important part of your vehicle. If you do not have the proper fuel pressure or volume you can starve the engine and cause major engine damage. The best way to cure this problem is to replace that worn-out...

Distributor Drive Gear This drive gear is what allows your distributor to mate with your camshaft. This drive bolts to the front of the cam gear. Must use either a mechanical fuel pump eccentric or our distributor drive spacer, see Part #: 1081025 if...

Water Pump When rebuilding your engine or replacing the timing chain, it is always a good idea to include a new water pump. We have the highest quality Toyota water pumps in stock all of which are new OEM quality Japanese-manufactured (Nissan or Aisin)...

Rear Axle Bearing Pocket These rear axle bearing pockets fit most Toyota Pickup and 4Runner axles made from 1979 to 1995. This bearing pocket is made from 4340 chromoly and allows you to use our rear Toyota or Samurai Rock Assault axle housings with an...

1" Pro Spiral Spacer 32/36 & 38 LC Engineering's spiral adapter was developed to enhance mid-range power, torque, and fuel efficiency. The unique dyno-proven spiral bore of the LC Engineering adapter causes the incoming air-charge to spin as it passes...

U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...

Vented Non-Cross Drilled Rotor Toyota Pick-Ups and 4Runners (86+) feature larger vented rotors from the factory. Earlier (79-85) trucks used solid, non-vented rotors up front along with smaller calipers. If you're installing a solid front axle on an...

Rotor For Rear Disc Brake Conversion Kit (w/o Parking Brake) Replacement rotor for the rear disc conversion, see Part #: 1055202. Replacement rotors are sold each, not as pairs. Contact our Tech Support Line for further information at...

Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...

Oil Filter Sandwich Adapter A sandwich adapter permits the installation of an engine oil cooler without relocating the oil filter. It is installed between the oil filter and the filter land on the engine block, providing a pressurized source of oil for...

Tacoma Speedometer Adapter (Mechanical to Electrical) Looking to put a gear-driven transfer case underneath your Tacoma, but having issues adapting your electric speedometer to the transfer case? Trail-Gear is now offering a Mechanical to Electrical...