1982

DCOE Jet Cover (w/ Wing Nut) LC Engineering offers only genuine Weber/Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment. Contact our Tech Support Line for further...

Denso 7mm Spark Plug Wires (Black) We realize not every engine is a race engine. Don't overspend on features that you can't use. Denso uses the highest quality spark plug wire in the industry. All silicone, Class E jacket construction endures...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Front Axle Torque Arm Bushings Stock rubber bushings are subject to the same deterioration problems as other rubber products. This causes control problems associated with road wander. Gain additional handling by replacing your rubber bushings with...

Power Steering Belt (1981 - 1995) Pickup & 4Runner 22R/RE/RET This high Performance V-Belt is designed with being a workhorse in mind, the polyester cord provides maximum power transfer and tension holding capability for the life of the belt. The...

Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...

OEM Coolant Bypass Union (Elbow) This elbow is a genuine OEM Toyota part. This is the 90 degree pipe that screws into the underside of the lower intake manifold that meets the coolant line from the back of the passenger side of the timing cover. It can...

2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...

Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...

Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing, includes  rear main seal & housing gasket.       Contact our Tech Support Line for further information at 928-575-2174.   Note:...

Oil Fitting (28BSPT to 1/8"NPT Female) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This is a steel fitting that will come in a silver or gold zinc finish. the 1/8 fittings may seem...