1984

Rock Defense Rear Bumper Support Kit 6 Lug 4wd Only This product is for the hardcore rock crawlers that need a little extra support for their rear bumper. This support welds to the bumper and can be welded or bolted to the frame for easy removal of the...

U Bend (6″ Radius) Use these 3" U-Bends for building your own headers or replacing a bent or damaged tube. NOTE: Size listed is the outside diameter. Constructed of mild steel. Contact our Tech Support Line for further information at...

Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...

Fuel Pressure Gauge Kit (EFI) Ever wonder if the fuel regulator is doing its job? Not sure if you're getting the right fuel pressure at the fuel rail? This new fuel gauge kit is the solution to this problem. This kit will replace the banjo bolt on the...

3″ Spacer Kit (Billet Flex Fan) This Flex Fan Spacer Kit has all the additional parts you need to install a 22R/RE Flex Fan. This spacer is made on our CNC lathe and mill made in the USA from billet aluminum. This spacer is 3" long and will clear all...

Oil Filter Sandwich Adapter A sandwich adapter permits the installation of an engine oil cooler without relocating the oil filter. It is installed between the oil filter and the filter land on the engine block, providing a pressurized source of oil for...

Crankshaft Scraper (Full Perimeter) During regular engine operation, a significant amount of oil adheres to or becomes entrained in, a cloud surrounding the spinning bottom end. This oil eats up the horsepower your engine is making by increasing the...

Water Pump Pulley (Billet 6") The 6" polished Underdrive Pulleys can reduce water pump RPM and dress up the front of your engine. These pulleys are CNC machined from billet 6061 T-6 aluminum bar stock and cut with performance lightening holes to reduce...

22R/RE Valve Cover Billet Insert Looking to spice up the engine bay of your 22? This should do the trick. Choose between (3) different lettering choices. Adhesive backing will be applied to the back of the insert prior to shipping. Contact our...

Fuel Pressure Gauge Kit (For In-Cab Use) GlowShift’s Tinted Series 100 PSI Fuel Pressure Gauge is the perfect accessory for anyone looking to keep a close eye on their fuel system’s pressure to ensure it’s performing at optimal...

Fuel Pressure Gauge Kit (For In-Cab Use) GlowShift’s Tinted Series 30 PSI Fuel Pressure Gauge is the perfect accessory for anyone looking to keep a close eye on their truck’s fuel system pressure to ensure it’s performing at...

Holley Fuel Pressure Regulator (1-4lbs) The regulator's job is to keep the pressure in the fuel system at a constant psi (Weber carbs work best in the 2.5-3psi range). Your fuel pressure regulator controls the amount and speed at which fuel is used by...