Oil Dipstick Kit (Short Style) Brand new oil pan dipstick kit will include the measuring stick, tube for the block and bracket for the mounting tube. All OEM parts direct from Toyota! Don't look any further for a new replacement dipstick to replace...

Street Tune-up Kit (w/ NGK Plug Wires) A tune up kit that won't break the bank, for your 1980 to1992 20R/22R/RE from LC Engineering. Included are four NGK spark plugs BKR5EYA, Set of NGK Spark Plug Wires, Distributor cap (black), and a good quality...

Front Window Outer Belt Weatherstrip Kit (1984-1989 Pickup & 4Runner) Looking to replace your dried or warn out seals? Well look no further we have teamed up with Fairchild Industries to carry any seal you could possibly need when resorting your...

Aisin Fan Clutch (Pickup / 4Runner / Celica) Looking for a replacement fan clutch for your application? LCE has you covered and cooled with a replacement Aisin fan clutch. Contact our Tech Support Line for further information at 928-575-2174...

2.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

Haltech iC-7 Standard Dash Mount Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. Thats where this plate comes in, it makes life EASY. Grab yours today so you can spend your time doing what you...

2.5" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

3.0" Cooling Pipe (Pre-Intercooler) Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. You'll want to get this air...

Header Flange (You Choose Style) Steel header flange for custom fabrication of exhaust header on 20R, 22R, or 22RE engines. 1/2" thick flange with 1-1/2" or 1 5/8" ports. This header flange is the same one we use when constructing our headers in house...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

Metal Backed Timing Chain Guides (Single Row) LC Engineering manufactures its metal-backed guides to address the common breakage problem of the plastic guides. These guides are a direct bolt-in upgrade and include mounting hardware. Contact our...

Front Control Arm Bushings These bushings maintain proper alignment under extreme conditions on and off-road and during competition. Helps provide quicker steering response and greater vehicle control. Whatever your demands, proper alignment (caster...