3.00" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

E-Boost Street Boost Controller (40 PSI) Racing technology for the street E-Boost street is an electronic boost controller aimed at the street performance market. It features many boost control capabilities found on its big brother the e-Boost2,...

Oil Feed Line (Stainless Steel Braided) Looking for a better oil feed line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any application...

Oil Drain Line (Stainless Steel Braided) Looking for a better oil drain line for your turbo? Look no further, LC Engineering has everything you need. This particular line was designed for our Turbo kits but it could be used for just about any...

Gauge Pillar (Double) Most older Toyota trucks had some pretty basic gauges (speedo, tach and fuel gauge). This doesn't work too well if you want to keep a close eye on the "heartbeat" of your engine. Most drivers want to see water temps, oil pressure,...

Fuel Pressure Gauge "T" Fitting (5/16" Hose to 1/8" NPT) This fitting makes installing your fuel pressure gauge much easier. The fitting has an 1/8"npt "T" fitting along with two 5/16" hose barbs. This will allow you to install your fuel pressure...

OEM Main Bolt (Cam Bolt) This is a brand new OEM Toyota main bolt. Ironically this is the same bolt used to hold the cam gear and distributor drive gear onto the front of the cam. Quantity 10 used for crank main caps.OEM Part #:...

Oil Pan Hardware Kit (Silicone Seal) This oil pan hardware kit includes all the bolts and washers needed to install your oil pan and pick up tube. This hardware kit is designed to work with silicone seal pans only. This kit will not work with gasket...

Timing Cover Hardware (Single Chain Kit) This kit is all the hardware you will need for the installation of the late model Timing Chain Cover in most applications. All hardware is zinc plated, or black oxide coated. NOTE: This kit will not address...

OEM Water Pump Gasket Gaskets seal and mate surfaces between various components to keep oil, coolant, air, and fuel in their respective places. Over time gaskets become brittle and break. Replace a leaky or corroded gasket before severe damage occurs...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...