1988

Carbureted Fuel Pump (3-5 Psi) This pump will maintain performance with carburetors for all street performance and off-road applications. This fuel pump will meet the performance demands of dual or single carburetor applications. This is an electric...

Boost Sensor (F.A.S.T. Ignition) This 2 Bar MAP (Manifold Absolute Pressure) sensor, is used as boost sensor for boost proportional retard with TRC-2, see Part #: 1082022. Contact our Tech Support Line for further information at 928-575-2174...

OEM Transmission Mount Your factory transmission mount is subject to the same abuse and torture that the motor mounts go through, sometimes worse. Factor in all the grease and oil that finds its way onto everything over time, add in some road grime,...

OEM Water Temperature Sensor EFi (4Runner/ Pickup/Celica/ Tundra) OEM Water Temperature Sensor EFi. OEM Toyota Part #: 89422-20010 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for...

Water Pump Pulley (Stock Size 4 3/4") This polished water pump pulley is the same size as a stock pulley (4 3/4"). This pulley is perfect for a low RPM application like rock crawling since it does not slow the water pump down as our underdrive pulleys...

Differential Drop Spacer Kit (w/ Sway Bar) One thing often overlooked when lifting an IFS truck is the differential and axles. Most larger lifts will drop the differential down with brackets, but with smaller lifts (torsion bar lift, ball joint spacer...

Holley Fuel Pressure Regulator Gauge Kit (1-4 PSi / Carb Only) If you are running a Weber carburetor on your Toyota truck, this kit is a must-have and a great way to keep your fuel system running right. Weber carbs work best in the 2.5-3psi range...

Cold Start Injector Service NOTE: Customer is responsible for paying postage to send their cold start injector to LC Engineering. Be sure to include the following with your injectors: Name (First & Last) Return Shipping Address Sales Order...

OEM Coolant Bypass Pipe When rebuilding an engine, or just servicing your cooling system, it pays to inspect all associated parts. Any line that carries coolant can become corroded, inhibiting a cooling system's effectiveness. We carry an OEM...

Sidedraft Carburetor Synchronizer This is the "must have" tool for proper tuning of Sidedraft Carburetors. Even the most experienced tuner needs this in his arsenal to make carburetor synchronizing precise and simple. Just place the synchronizer in...

Haltech iC-7 Tube Mount (OD 1.25" / 31.75mm) Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. That's where this plate comes in, it makes life EASY if you have a custom build (tube chassis). Grab...

OE Head Bolts LC Engineering always recommends replacing the old stretched head bolts with new ones to ensure the correct head torque. This OE head bolt set should be considered mandatory if you are replacing head gaskets on your 3VZ. NOTE: Parts...