1990

Base Gasket Fix or prevent pesky vacuum leaks at the carburetor base by replacing the gasket between your stock 22R Aisin carb and the intake manifold. Genuine Toyota quality gasket. Contact our Tech Support Line for further information at...

Throttle Body Gasket (Paper "O" Shape) Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. On the 3.4...

EFI Intake Bolt (Long) M8-1.25 x 95mm Socket Head Cap Screw for use on EFI intake. This product should not be used in a manner that violates Federal EPA Laws. Contact our Tech Support Line for further information at 928-575-2174. Check out ...

OEM Battery Hold Down Nut OEM Toyota nut for battery hold down bracket bolt. OEM Toyota Part #: 90179-08220 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Street Performer Retainer (Single Spring) Our Street Performer retainers are an excellent OEM replacement that matches our street performer valve springs perfectly. If you have a mild street motor that doesn't need anything exotic in the valvetrain,...

OEM Battery Hold Down Bolt OEM Toyota bolt for battery hold down bracket. OEM Toyota Part #: 90119-08974 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...

Oil Cap O-Ring This oil cap o-ring fits both of LC Engineering's Billet Aluminum Oil Caps, see Part #: 1024082 as well as Part #: 1024088. All new oil caps come with this o-ring. Contact our Tech Support Line for further information at...

OEM Coolant Bypass Hose Clamp If you have ever had to connect the lines on the bottom of your throttle body, you know the foresight needed to get everything lined up properly to fit your long nose pliers in for the final step. Well, we here at LC have...

Throttle Shaft Nut Have you lost your linkage shaft nut? No stress LC Engineering has you covered. We offer this to make your life a little easier. Don’t wait until it is too late, grab one today. Contact our Tech Support Line for further...

Oil Drain Gasket LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This gasket goes between the turbo and the oil drain plate. Contact our Tech Support Line for further information...

OEM Coolant Bypass Hose Clamp If you have ever had to connect the lines on the bottom of your throttle body, you know the foresight needed to get everything lined up properly to fit your long nose pliers in for the final step. Well, we here at LC have...

Manifold Adapter Gasket (Holley Carburetor to Stock 22R) This gasket is made for our custom carb adapter that mates your Holley carburetor to a stock 22R intake manifold. NOTE: This gasket is used in our smooth bore as well as spiral bore adapter...