1993

Oil Drain Plug (Large) The LC Engineering 20R/22R Large oil drain plug is manufactured of high-quality material to handle the most challenging conditions. LC Engineering drain plugs and gaskets are the quality parts needed to do your job right. The...

Thermostat Housing Gasket (Round Rubber) Any time you replace the thermostat or remove the housing, you should replace the gasket to avoid future leaks. This gasket is a round rubber O-ring gasket that offers the best possible seal for your thermostat...

Clutch or Brake Pedal Cover Are your clutch and brake pedal covers worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on manual transmission vehicles or clutch pedals on 1979-1995 Toyota Pick-Ups, 4Runners &...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Throttle Body Gasket Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is a stock replacement...

Oil Drain Plug (14mm X 1.50 Replacement Aftermarket Pan) This LCE 20R/22R replacement oil drain plug is used for some aftermarket oil pans. Specifications 17mm Head N14-1.50 Thread Pitch NOTE: Gasket is not included, see Part #: 1013116 for...

Spark Plug Wire Clip This is the replacement cage that will go around the boot at distributor to lock the spark plug wire onto the cap. This is for the OEM wires or LC Engineering's pro 8.5mm spark plug wires. We always recommend the use of our Race...

Distributor Drive Gear Spacer When eliminating the fuel pump eccentric from the stock distributor, you will need this spacer to bring the drive gear back into alignment. This is an OEM core unit processed by LC Engineering. Only used on 22R when...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Crankshaft Key Set (Woodruff Key) Crankshaft keys (also called Woodruff Keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...