Clutch or Brake Pedal Cover Are your clutch and brake pedal covers worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on manual transmission vehicles or clutch pedals on 1979-1995 Toyota Pick-Ups, 4Runners &...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Throttle Body Gasket Throttle body gaskets can be a source of hard-to-find vacuum leaks if the throttle body is removed or disrupted. Any time you remove your throttle body, you should replace the gasket while you're at it. This is a stock replacement...

Oil Drain Plug (14mm X 1.50 Replacement Aftermarket Pan) This LCE 20R/22R replacement oil drain plug is used for some aftermarket oil pans. Specifications 17mm Head N14-1.50 Thread Pitch NOTE: Gasket is not included, see Part #: 1013116 for...

Spark Plug Wire Clip This is the replacement cage that will go around the boot at distributor to lock the spark plug wire onto the cap. This is for the OEM wires or LC Engineering's pro 8.5mm spark plug wires. We always recommend the use of our Race...

NGK Spark Plug BKR5EGP (G-POWER PLATINUM) LC Engineering carries NGK G-Power Platinum spark plugs, they are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel...

NGK Spark Plug BPR5EGP (G-POWER PLATINUM) NGK G-Power Platinum spark plugs are an economical upgrade option from traditional spark plugs. Fine wire platinum center electrode provides excellent performance and fuel efficiency. The small tip improves...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Crankshaft Key Set (Woodruff Key) Crankshaft keys (also called Woodruff Keys) are semicircular shaped, removable keys that fit into matching keyways cut into the crankshaft leaving protruding tabs. These tabs mate with matching slots on the harmonic...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...

Rear Main Seal Housing Gasket This gasket seals the rear main seal housing to the block on 20R-22RE engines. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only. Images...