1998

NGK Spark Plug (BKR6EYA / 7990) LC Engineering carries NGK V-Power spark plugs, which offer economical performance for your Toyota, and are the only plugs with NGK's V-Groove technology. They enhance the spark kernel, lower the voltage requirement of...

8" Pinion & Transfer Case Flange Nut The flange nuts are recommended to be staked or peened over to lock so they are not considered reusable. This stock replacement nut is used on the 8" pinion in the rear 1979-2002 and most transfer case flanges...

1/4" Blue High Pressure Hose (Fuel or Oil / Teflon Lined / Push-Lok Compatible) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This 1/4" hose is perfect as an oil feed for your...

Exhaust Clamp (2 1/4") This 2-1/4" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

Spark Plug Wire Clip This is the replacement cage that will go around the boot at distributor to lock the spark plug wire onto the cap. This is for the OEM wires or LC Engineering's pro 8.5mm spark plug wires. We always recommend the use of our Race...

Valve Keeper (Hardened) Hardened Valve Keepers fit all 6mm valves using stock Toyota retainers and our Pro Titanium Retainers. A must for high rpm applications! NOTE: Keepers are sold as a single set (per valve). Contact our Tech Support Line...

Round Collector Exhaust Gasket (2" OD 1.590" ID) This Exhaust gasket is used on the stock exhaust manifold where it connects to the two exhaust pipes. Stock applications will require (2). Alternate exhaust gasket sizes: 2.620" OD 1.950" ID, see...

Straight Fitting (1/8" NPT to -4AN) LC Engineering carries all the components you need to build your own turbo kit or service your LC Engineering Kit. This fitting is used for the oil feed at the block or turbo. Perfect for going from a 1/8" NPT hole...

Spark Plug Tube Seal This gasket seals the spark plug tube to the valve cover to keep oil from contaminating the spark plug boots. NOTE: Sold individually. Contact our Tech Support Line for further information at 928-575-2174. Note:...

Exhaust Clamp (2 1/2") This 2-1/2" exhaust clamp allows you to attach your exhaust without welding. This makes the future removal of your exhaust system much easier. These are the clamps used on LC Engineering's Performance Exhaust Systems. It can be...

OEM Mechanical Lock Nut (Exhaust Manifold) When installing new aftermarket headers, new hardware should be used. An even clamping force is required to keep the header tight against the head in order to seal the exhaust gasket properly. The studs on...

Round Collector Exhaust Gasket (2-Bolt x 2" Flange) OEM style exhaust gaskets feature a carbon material and stainless steel fire ring for long life and a positive seal. These round collector gaskets are the same type we use for all of our street header...