-
Solid Pinion Spacer (High Pinion) Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a...$39.99 -
Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...$39.99 -
OEM Clutch Release Fork Sub-Assembly OEM Toyota OEM Clutch Release Fork Sub-Assembly. OEM Toyota Part #: 31204-35031 Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes...$37.09 -
Clutch Slave Cylinder The clutch slave cylinder is typically located on side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch. One...$36.76 -
OEM Clutch Fork Boot Keep your clutch components clean with this OEM Clutch Fork Boot. After you find these boots cracked or missing on older trucks, especially on off-road applications. OEM Toyota Part #: 31126-20060 Contact our Tech Support...$34.14 -
Differential Drop Spacer Kit (w/o Sway Bar) One thing often overlooked when lifting an IFS truck is the differential and axles. Most larger lifts will drop the differential down with brackets, but with smaller lifts (torsion bar lift, ball joint...$33.04 -
Clutch Slave Cylinder The clutch slave cylinder is typically located on the side of the transmission. The clutch slave cylinder receives hydraulic pressure from the clutch master cylinder which pushes the slave cylinder shaft out to actuate the clutch...$32.52 -
Trail Creeper 2.28x4.70 Dual Transfer Cases If a 4.7:1 transfer case gear ratio has proven insufficient for the type of offroading that you want to do and you look forward to the kind of quality time with your tools that modifying your floorboards and...$3,699.99 - $3,857.96 -
Manual Hub Conversion Kit This kit is a must when converting from Toyota Automatic Hubs to Manual Hubs. This kit includes special locking nuts and plates that are necessary to lock the wheel hub and rotor onto the spindle when converting to manual hubs...$27.87 -
Stock Replacement U-Joint (Heavy Duty w/ Zerk) Looking for a top quality replacement U-Joint? This joint has been tested to 4,000 Ft.-Lbs. of torque in our axle testing machine. These joints are up to any task and will handle high output motors and low...$26.23 -
HD Transfer Case Output Seal (Rear) Tame your rear driveline and prevent leaks while on a steep incline starting today! Optionally, this rear EcoSeal can be used as a front output seal. Simply replace the factory dust shield with this EcoSeal! NOTE:...$21.50 -
Axle Housing Breather (Replacement) Factory Toyota axle housing breather. Internal spring loaded flapper valve prevents water from entering through breather during water crossings. Stock replacement for old, rusted or damaged units. This product...$19.99
-
fast shipping
Speed Delivery