Rocker Arm Assembly

(OE)

We at LC Engineering supply only the best OE parts accompanied by our Pro Rocker Shafts with four large oiling holes as opposed to the two small holes on the OEM shafts. This bolt-on kit will get you back on track with your build but not let you down in the future due to sub par parts. Buyer beware of the reground rockers in the market. Regrinding the pad on the rocker can remove the heat treated portion of the pad making for a soft rocker. Rocker arms that are reground will not have the factory geometry of a stock rocker. To regrind a rocker will take care of the face surface but will do nothing to address the rocker shaft bore, a loose rocker bore will make adjustment difficult and will never be correct.

Kit Includes:

• (8) Rocker Arms (OE)
• (8) Valve Adjusters (OEM)
• (8) Valve Adjuster Nuts (OE)
• (3) Washers (OEM)
• (3) Allen Bolts (OEM)
• (2) Rocker Arm Shafts (Pro Shafts)
• (5) Rocker Arm Stands (OEM)
• (4) Valve Cover Studs (OEM)

NOTE: The Rocker Arms utilized in this kit are an OE Japanese replacement Rocker Arm. We have tried numerous aftermarket rocker arms on the market and these are the best. We can offer these as a replacement to the factory OEM rockers giving you the confidence needed in the product while saving you from spending a fortune.

Alternate Parts:

• OEM Adjuster, see Part #: 1023069
• OE Adjuster Nut, see Part #: 1023066
• OEM Adjuster Nut, see Part #: 1023072
• OE Rocker Arm Kit, see Part #: 1023011
• OEM Rocker Arm Kit, see Part #: 1023019
• OEM Rocker Arm Assembly, see Part #: 1023018
• Pro Rocker Shafts Individually, see Part #:1023021

Contact our Tech Support Line for further information at 928-855-6341.