OEM Rocker Arm Set
(Adjusters & Nuts)
Save big money over purchasing separately. This is a set of (8) rocker arms for the 20R and 22R/RE/RTE Toyota 4 cylinders. A genuine Toyota Part from Toyota Directly. We have tried all the rocker arms on the market and one of the best selling kits we offer. The rockers will include the factory Toyota adjuster and the adjuster nuts. Sold as a set of eight rockers eight adjuster and eight adjuster nuts. All parts in this kit are Genuine Toyota Parts. Buyer beware of the reground rockers on the market. Regrinding the pad of the rocker can remove the heat treated portion of the pad making for a soft rocker. Rocker arms that are reground will not have the factory geometry of a stock rocker. To regrind a rocker will take care of the face surface but will do nothing to address the rocker shaft bore, a loose rocker bore will make adjustment difficult and will never be correct.
NOTE: Using a dial indicator or telescoping gauge, measure the inside diameter of the rocker arm. Standard inside diameter: 16.00 - 16.018 mm ( 0.6299" - 0.6306" ). These are the 22R/RE/RTE Aluminum Rocker Arms with a 1.50 ratio. The older 20r Steel ones were 1.43 ratio.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information at 928-855-6341.
Check out LCEngineering.com for New Products, Tech Articles, Specials & Monthly Newsletters!
Note: Images are for illustration purposes only. Images may not represent the product listed. Please contact customer service with any questions or concerns: 1-928-505-2501.
|