Stainless Brake Lines (6" Extended Length) LC Engineering is proud to offer D.O.T. stainless steel braided brake lines with a gray PVC cover using hose lined with Teflon, making it compatible with all brake line fluids on the market today. These lines...

Rear Disc Brake Conversion Kit (79-95 P/U 2WD) We've partnered up with Little Shop Manufacturing to offer you this rear disc brake conversion kit that won't break the bank. Installation is simple, requires no welding! Serviceable parts are also...

Disc Brake Upgrade Kit (Front) This brake upgrade kit is perfect for upgrading your truck's front braking performance without completely upsetting the brake balance like a big brake kit will. Depending on any other modifications you make to your...

Brake Caliper (Right Front) These calipers are the larger V-6 style found on (88-95) Pick-Ups and 4Runners. This is a great replacement part for worn out, or leaking calipers on IFS trucks with the 3VZ V6 or the 22R/RE/RET. NOTE: Does not include...

Brake Caliper (Left Front) These calipers are the larger V-6 style found on (88-95) Pick-Ups and 4Runners. This is a great replacement part for worn out, or leaking calipers on IFS trucks with the 3VZ V6 or the 22R/RE/RET. NOTE: Does not include...

Brake Master Cylinder (1" Bore) Are you upgrading your brakes from drums to discs? Are you just increasing the rotor size? Either way we both know that the Toyota's stopping power just doesn't seem to be up to today's standards. This brake master...

Clutch or Brake Pedal Cover Are your clutch and brake pedal covers worn out from years of driving your Toyota? Our stock replacement covers fit brake pedals on manual transmission vehicles or clutch pedals on 1979-1995 Toyota Pick-Ups, 4Runners &...

Brake Hard Line Kit (Left & Right) This caliper hard line kit is for straight axle Trucks and 4Runners only. This kit includes the caliper brake lines for both the right and left sides. NOTE: Not for IFS vehicles. Contact our Tech Support...

Caliper Bleeder Screw The caliper bleeder screws are often stripped out and difficult to open. Replace your damaged, clogged, or stripped out caliper bleeder screw with one of these. This is just one of the many parts we carry for brake hardware...

Bleeder Cap (Rubber) When you replace the bleeder screw, be sure to replace this rubber cap. This cap keeps dirt and other debris from finding its way into the hole in the bleeder. Clogged bleeder screws can be a pain when it comes to bleeding your...

Caliper Bolt This bolt is the perfect replacement to bolt your caliper to the spindle. After years of service, these bolts can end up stripped or damaged. This is just one of the many parts we carry for brake hardware. Contact our Tech Support...

Caliper Bolt Washer This washer is used with our replacement caliper bolts. Replace the washers when you replace the bolts. This is just one of the many parts we carry for brake hardware. Contact our Tech Support Line for further information at...