Distributor Drive Gear
This drive gear is what allows your distributor to mate with your camshaft. This drive bolts to the front of the cam gear. Must use either a mechanical fuel pump eccentric or our distributor drive spacer, see Part #: 1081025 if...
OE Throttle Position Sensor
Throttle position sensors are switches on the throttle body that keep the engine control computer informed about the throttle opening. The TPS is a variable resistor that changes resistance as the throttle opens wider. The...
Billet Wire Loom
(11mm Livewire Separators)
Not only does this setup look great, but the LC Engineering billet plug wire loom allows you to route your wires away from exhaust heat without worrying about them coming loose. The LC Engineering Billet Plug...
Oxygen Sensor
(Heated 4 Wire)
This is considered a universal replacement for the 4-wire heated O2 sensor as well as a stock replacement. This would be an upgrade to the one wire but will require running power and ground to the sensor. Constructed from...
Haltech iC-7 Standard Dash Mount
Haltech’s new iC-7 Colour Display Dash is always better when it has the ability to mount with ease. Thats where this plate comes in, it makes life EASY. Grab yours today so you can spend your time doing what you...
Labor for Installing Magnets in Pulley
We provide the service of installing the magnets in the harmonic balancer for the stand-alone pro fuel system. With a two day turnaround, we can get this job done right the first time. LC Engineering offers a...
Billet Wire Loom
(LC 8.5mm Pro Wire Separators)
Not only does this setup look great, but the LC Engineering billet plug wire loom allows you to route your wires away from exhaust heat without worrying about them coming loose. The LC Engineering Billet...
Air Temp Sensor
(â"¦Å“″ NPT)
Air Intake Temperature sensor for use with our Pro Fuel Injection systems.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are for illustration purposes only. Images may...
Throttle Position Sensor Plug
(w/ Wires)
As time marches on Toyota will, little by little, discontinue parts it carries for the 22R/22RE powered trucks. We are here working hard to step in and make sure that the parts you need are still out there to...
Throttle Position Sensor Plug
(w/ Wires)
As time marches on Toyota will, little by little, discontinue parts it carries for the 22R/22RE powered trucks. We are here working hard to step in and make sure that the parts you need are still out there to...
D.U.I. Distributor Cap & Rotor Kit
(Race)
This is the replacement cap and rotor for the D.U.I. Distributors.
NOTE: This kit will not include a coil.
Contact our Tech Support Line for further information at 928-575-2174.
Note: Images are...
Coolant Temp Sensor
This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector.
Contact our Tech Support Line for further information at...