Heat Riser Kit (Attaches Heat Riser To Air Cleaner) This kit is used to connect a heat riser tube to the stock air cleaner assembly. This kit can be used on any header with 1.5" primary tubes. Kit Includes: (3) Hose clamps (1) 1.5″ Standoff (1)...

High Torque Flywheel (35Lbs Billet Steel) Now LC Engineering has the 3VZ 4 wheeler covered with our new high torque flywheel. Keep the inertia going by running the 35 pound LC Engineering flywheel. This is 13 pounds over the stock Toyota flywheel...

OEM Bell Housing to Block Bolt Set After many years of sitting in your engine compartment, the bell housing bolts might not be in the best shape, especially if you've had the engine or trans out a few times. Instead of scrambling to replace a bolt or...

Dual Comp Clutch Disc (9 1/4″) Already have an LC Dual Comp clutch kit and just need to replace the disk? Here you go! Just slip one of these in place of your old worn out disk and you will be good to go. This is the replacement disk for all our 9...

Metallic Clutch Disc (9 1/4″) Already have a LC Metallic clutch kit and just need to replace the disk? Here you go! Just slip one of these in place of your old worn out disk and you will be good to go. This is the replacement disk for our 3VZ pro...

Metallic Clutch Kit (9 1/4") All of LC Engineering's clutch kits feature all new components with a single diaphragm H.D. pressure plate. Don't be fooled by fancy spinning gizmos. A diaphragm clutch delivers full holding power at all engine rpm's. For...

Pressure Plate (9 1/4") LC Engineering's pressure plates are a heavy-duty replacement with added holding power for everything from a daily driver to a full race car. These pressure plates will give you a firmer pedal feel without overpowering you or...

Rear Disc Brake Conversion (w/o Parking Brake) We now offer a disc brake kit for your 4WD Pickup and 4Runner! We had three goals in mind. It had to be strong, easy to install, and a complete kit. We think as you read on you will agree that all three...

Solid Axle Vented Rotor Upgrade (Front) This kit is designed to change the solid stock rotors that are found on the front straight axle 1980 to 1985 trucks or SAS using the stock Toyota front axle to the newer vented rotor. Includes the LC Engineering...

LC Pro Air Intake Kit You asked, we delivered! The New LC Pro Air intake kit for the 3.0 liter 3VZ trucks and 4Runners. We have developed an intake tube and filter kit designed to eliminate the ugly restrictive filter box, as well as get rid of the...

LC Pro Air Intake Kit Now 50 state smog legal! You asked, we delivered. For years we've been offering our stainless steel crossover intake tube, as well as the K&N FIPK kit for the same trucks. Well now we've combined the best of both worlds! We...

Tube Kit Only (LC Pro Air Intake) Not Smog Compliant The LC Pro Intake Tube replaces your restrictive factory plastic intake system with a 2 1/2" mandrel bent ceramic-coated stainless steel tube while retaining the factory inlet and air box. CNC...