Model

Solid Pinion Spacer Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer...

Solid Pinion Spacer (High Pinion) Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a...

Dust Shield Eliminator Kit The brake backing plates can be a bother on front Toyota solid axles. They often get bent from trail damage and small rocks can get trapped between the backing plate and the rotor causing noise and damage. For many years we...

Knuckle Felt Protector Kit (Rock-Ring) We have had a lot of people tell us they don't like the stock inner felt plates because they are so thin and are easily damaged in the rocks. Well check out this trick solution... super heavy duty rings made from...

Front Brake Pads Need and inexpensive way to stop your Toyota truck. Try these Premium Semi-Metallic asbestos-free front replacement brake pads. This pad is for use with the late-model IFS 4WD calipers. If you are adding the vented rotors and upgraded...

Trail Gear Rock Ripper Air Filter 8.8" (Replacement) This is the replacement air filter for the Tacoma 3.4Liter Extreme Rock Ripper Air Filter 8.8" kit, This filter is interchangeable with K&N filter RU-3050. NOTE: For the precharger for this...

Trail Gear Rock Ripper Air Filter 5" (Replacement) This is the replacement air filter for the Tacoma 2.4Liter Extreme Rock Ripper Air Filter 5" kit, This filter is interchangeable with K&N filter RU-4600. NOTE: For the precharger for this filter,...

Weld On Differential Armor Protect your differential gears from unnecessary damage. Trail-Gear now offers weld on differential Armor for 2007-2013 FJ Cruiser. Precision Laser Cut from 1/4" A36 Steel, then CNC formed to provide the best protection...

Firewall Kit When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener...

Rock Assault Front Axle Truss The Rock Assault™ Front Axle Truss will weld onto the top of your Rock Assault™ Front Axle Housing for extra protection against bending during competition or other extreme applications. The Rock Assault™ Front Axle Truss...

Rock Assault Steering Stops A good set of steering stops is critical so that your steering does not over travel and damage other steering or axle components. Our Rock Assault steering stops are machined from solid billet so you will never have to worry...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...