Oil Filter Adaptor Plate 3/4 UNF-16
This aluminum sandwich plate makes it simple to install your Oil Pressure and Oil Temperature senders—no drilling or tapping required. Just:
- Remove your oil filter.
- Screw the plate on in its place.
- Reinstall the filter on top of the plate.
- Install your senders into the available ports.
The plate includes (4) 1/8" NPT fittings, 4 plugs, an O-ring gasket, and installation instructions. It can rotate 360° to help you find the ideal orientation for sender clearance.
Plate adds 29mm (1.15") to your oil filter length check clearance of on your oil filter
Center Nut Torque Specs
- Torque: 23 ft-lbs
- Nut Size: 26mm (1")
Sensor Installation Tips
- NPT threads are tapered—tighten by hand, then turn 3/4 to 1.5 turns more.
- Some exposed threads are normal and necessary for sealing.
- Use Teflon tape or Loctite on the threads for a proper seal.
- Do not overtighten or you may damage the threads.
