Lower Knuckle Caps
(Solid Axle)
These stock replacement caps fit on the bottom of 79-85 Toyota solid axle knuckles.
This product should not be used in a manner that violates Federal EPA Laws.
Contact our Tech Support Line for further information...
Trail Safe Knuckle Ball Wiper Seal
Tired of wiping big clumps of dirty sandy grease off of your knuckle balls after every trip? So are we. We asked our engineering department to look at the problems with the OEM design along with what was currently...
Crossover Steering Drag Link
(You Choose Size)
These heavy duty drag links are made from 1.25" x .250" wall DOM tubing. Precision tapped. Left side thread mark. Powder coat black finish. When installing a Rock Assault Front Axle Housing and using a hi...
Tie Rod
(Choose Your Length)
Trail Gear's heavy duty tie rods are made from 1.25" x .250" wall DOM tubing, precision tapped with a left side thread mark. Each rod is test fitted to ensure rod ends thread in with correct fit. Powder coat black finish...
Steering Columns
3 1/4 Inches: This steering column will allow you to use your existing Toyota steering linkage without having to buy a coupler and then cut and weld on your steering shaft. This steering column measures 3 1/4 inches from the base of...
Steering Stabilizer
(Old Man Emu)
Designed to reduce the effect of wheel vibration and improve the feel, handling and control of the vehicle, OME's steering stabilizers will also reduce the aggressive rotation of the steering wheel over rough roads...
Steering Stabilizer Kit
(9.55" Stroke)
To reduce steering vibrations at higher speeds, a steering stabilizer can be very helpful. We offer a stabilizer kit that attaches above the drag link. One end welds to the passenger side frame rail and the other...
Steering Pump Kit Hoses
This kit contains one high pressure and three low pressure power steering lines. These lines are used to connect the pump, steering box and cooler together. The two hoses that go from the steering ram to the steering box are not...
Clevis End Kit
Our Clevis End Kit is the most complete and affordable kit on the market. All hardware is included along with the necessary spacers. The Clevis ends are clear zinc-plated for a sharp look and long lasting finish. This kit will fit most...
Steering Box Mount /Reinforcement
(IFS Steering Box)
If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing edges prevent frame cracking. Heavy duty design with a...
Power Steering Pump Bracket Kit
(Rock Assault)
This pump bracket is designed to adapt our "TC" style power steering pumps to your 75-95 Toyota 20R/22R/RE/RET engine. This bracket will utilize the stock idler pulley for the power steering belt.
NOTE:...
Ram Mounting Kit
(Double Ended)
This kit will take almost all the fabrication work out of mounting your Rock Assault Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on...