Odds and Ends

Power Flow High-Performance Power Steering Pump | 1,650 PSI (w/o Pulley) Engineered for the most demanding off-road builds, the Power Flow 1650 PSI Pump delivers the ultimate in steering performance...

Crossover Steering Arms (4 or 6 Stud) Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are...

Single-Ended Hydro Assist Rams Experience the benefits of hydro assisted steering with a range of rams for a full spectrum of applications. Our Single-Ended Ram models are available in 6" stroke...

Power Steering Reservoir When installing a high flow pump such as the one listed above, it is important to use a larger reservoir to provide enough fluid when the system needs it. The stock...

by Trail-Gear

Crossover Steering Drag Link (You Choose Size) These heavy duty drag links are made from 1.25" x .250" wall DOM tubing. Precision tapped. Left side thread mark. Powder coat black finish. When...

Tie Rod (Choose Your Length) Trail Gear's heavy duty tie rods are made from 1.25" x .250" wall DOM tubing, precision tapped with a left side thread mark. Each rod is test fitted to ensure rod ends...

Steering Box Mount /Reinforcement (IFS Steering Box) If you're installing crossover steering on your 79-85 4wd Toyota you're going to need to mount an IFS steering box. Angled leading and trailing...

Power Steering Pump Bracket Kit (Rock Assault) This pump bracket is designed to adapt our "TC" style power steering pumps to your 75-95 Toyota 20R/22R/RE/RET engine. This bracket will utilize the...

Power Steering Pump Bracket This power steering pump brackets is designed for the TC style power steering pumps and include all applicable hardware. NOTE: This is for the Trail Gear pumps not for...

Power Steering Fluid Cooler If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and...

Power Steering Pump Pulley (V-Belt) This pulley is designed to fit our standard or full hydraulic power steering pumps. NOTE: Not designed for the stock pump. This product should not be used...