Lower Shock Mounts These shock mounts are designed to weld directly onto the axle housing. These mounts can be used on front or rear axle applications. Made from 3/16" plate steel. Mounts have curved bottoms that can be mounted horizontally or...

Johnny Joint 1.25" Rod End (Right Threaded) Forged Johnny Joint® rod ends feature forged steel construction, a 1 1/4"-12 right hand threaded shank and come fully assembled with our standard Johnny Joint internals (2.625" wide ball center with a...

Johnny Joint Jam Nut (Right Threaded) These jam nuts are good to have if you spend a lot of time working on your rock crawler suspension. These jam nuts tighten against the rod ends to keep them from loosening. 1 1/4"-12 right hand thread jam nut for...

Creeper Joints (1″ Thread / 9/16" Right Thread) These heavy duty rod ends are ideal for today's flexible suspension systems. Super strong, Creeper Joints will hold up to years of punishment. The outer shell is a single forged piece. The inner flex ball...

18mm Shackle Mount (Pair) Creeper Joints are also available in a shackle mount for use with leaf springs. Using a Creeper Joint on the shackle end of a leaf spring reduces spring binding and increases suspension flex. Creeper Joint shackle mounts are...

Front Shock Hoops The Universal Shock Hoop Kit is long enough to accommodate a 14" shock, but not so long that you cannot use a 12" shock. The shock hoops are made out of 1035 DOM and are precision CNC bent to ensure the highest quality product. From...

Rock Assault 6-Ply Limit Strap (You Choose Length) Trail-Gear introduces the industry's first 6-layer, 1.75" nylon webbing limit straps. Each strap features 4130 heat-treated Chromoly Steel buckles that have been zinc-plated for corrosion-resistance...

Limiting Strap Clevis Kit Looking for an easy way to mount your limit straps? Trail Gear is now offering a Clevis Kit for your limiting straps in both single and multiple strap configurations. Our Clevis kits are made out of Super Metal Chromoly Steel...

Sway Bar Relocation Bracket (ReadyLIFT) The thick CNC machined link body design incorporates left and right turn heim end links that allow for easy adjustment, even in a moment's notice should you feel the need to adjust the sway bar setting. We...

Toytec 1/2" Solid Steel Flat Axle Shim This shim bolts to the bottom of your leaf pack using the included new leaf spring center bolt. This part can be used to help with the drivers lean that is common with Toyota trucks. Can be used side to side for...

Toytec Axle Degree Shims These 3 degree shims bolt to the bottom of your leaf pack using the included new leaf spring center bolts. Axle degree shims are ideal for Add-A-Leaf and Leaf Pack installs to minimize or eliminate rear drive line vibration...

Toytec Replacement Center Pins (Pair) (2) Replacement center pins for rear Add-A-Leafs. These are included in all of our lift kits with add-a-leafs. NOTE: Due to many supply chain issues, this product may be on backorder and could take from a few...