Air Injection Tube Block-off Plate Kit (Trail Gear) Trail-Gear has come up with this very clean way to totally eliminate your stock air injection tube. This kit contains 2 plates that will allow you to install our headers without the air injection tube...

Pro Water Block Plate Kit This water block plate kit is perfect when trying to eliminate some of the un-necessary water lines on some applications. This kit will come with a block plate for the center of the head (Offenhauser manifolds will need this),...

Blow Off Valve Weld On Fitting (Race Port) This weld-on adapter is designed to work with our blow of valves when installing on intake tubes. This adapter will fit our Race Port blow off valves only. This adapter will not fit our Kompact series, Vee...

DCOE Jet Cover (w/ Wing Nut) LC Engineering offers only genuine Weber/Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment. Contact our Tech Support Line for further...

Power Valve This will fit the genuine Weber 32/36 or 38 Carbs we sell. These are not included in the rebuild kits. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...

Metal Backed Timing Chain Guides (Dual Row) Used on all 20r and 81-82 22r engines from the factory. LC Engineering uses factory OSK metal-backed guides to address the common breakage problem of the plastic guides on 83-84 factory single row engines...

20R Intake Manifold Plug Kit This plug kit comes with all the necessary plugs for a Cannon Intake Manifold. There are two holes that need this shouldered plug to seal. If you look at the picture you will see that there is a "step" in the hole that the...

Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...

2.32" ID Silicone Elbow (45º / Black) Our silicone hose is the high performance choice for vacuum hose! Dress up your engine compartment by replacing your vacuum lines with the highest quality silicone hose available! Full vacuum through the following...

2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...

Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...

Garrett T3 Exhaust Discharge Flange (4-Bolt) Use 2.5" OD tubing in the groove or 3" OD tubing outside the groove. 3" OD is tight near the bolt holes but works fine so you're not limited to a 2.5" downpipe. Contact our Tech Support Line for...