1991

Throttle Body Extension (40mm) Use these extensions to provide a mounting surface for an air filter baseplate, beyond the fuel rails on 2900, 2930 and 3000 series throttle bodies. These components can also be used to extend the effective length of an...

Transfer Case Shifter Boot (OEM) It's common for the factory transfer case boot to degrade over time, crumble and disintegrate. This often results in dirt and mud getting into the transfer case shifter then into the transfer case. This simple Factory...

Weber Velocity Stack Dome Screens LC Engineering offers only genuine Weber / Redline products. Don't get fooled by cheap imitations out there, they will never perform as good as genuine Weber equipment. NOTE: You will need (1) kit per sidedraft...

Spindle Stud Kit When assembling your spindles gaskets does it feel like your all thumbs? This kit contains (16) studs and flanged nuts. With studs installed it's easier to install the spindle gaskets. Gaskets are placed on the studs one at a time,...

Solid Pinion Spacer Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a little longer...

Solid Pinion Spacer (High Pinion) Solid pinion spacers prevent loosening of the gear setup preload. Originally designed for older Toyota applications, Toyota stopped using them decades ago. Solid spacer and shims replace the crush sleeve. It takes a...

Front Brake Pads Need and inexpensive way to stop your Toyota truck. Try these Premium Semi-Metallic asbestos-free front replacement brake pads. This pad is for use with the late-model IFS 4WD calipers. If you are adding the vented rotors and upgraded...

Rock Assault Front Axle Truss The Rock Assault™ Front Axle Truss will weld onto the top of your Rock Assault™ Front Axle Housing for extra protection against bending during competition or other extreme applications. The Rock Assault™ Front Axle Truss...

Matsuba Drive Shaft U-Joints (Stock Replacement) OEM Replacement U-Joint. We have tested these joints to 3700 ft-lbs of torque before failure. Includes four install clips and Zerk grease fitting. NOTE: Does not fit CV side of driveline. Contact...

26" Extended Brake Line (Front / Female - Female) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size:...

26" Extended Brake Line (Rear / Female - Male) These steel braided brake lines are 26" long and are DOT approved. Front lines use factory mounting clips so there is no need to modify the factory clips in any way. Specifications: Size...

GT25 / GT28 Discharge Flange (5-Bolt Deep) New part, text coming soon. Call the sales desk for more information. Contact our Tech Support Line for further information at 928-575-2174. Note: Images are for illustration purposes only...