-
Leafspring Bumpstop Extensions When installing leaf springs it's important to have bumpstops to limit how far the leaf springs compress. These easy to weld on extensions make installing bumpstops quick and easy. Extensions weld directly to the frame...$29.99 -
Weld On Flat Tab (3" Cope) Our 3" coped weld on flat tab is made from 1020 hot rolled steel, 1/4" thick, and is designed for a 9/16" bolt. The width is 2" and the overall height is 2-15/16". The center of the hole is is 1-5/8" from the top of the cope,...$29.99 -
Weld On Flat Tab (9/16" Hole) Our weld on flat tabs are made from 1020 hot rolled steel, are 1/4" thick and are designed for a 9/16" bolt, they are 2" wide and 2 5/8" tall. The center of the hole is 1 5/8" from the bottom of the tab. These tabs are...$29.99 -
Glowshift Single Gauge A-Pillar Pod GlowShift's Universal Single A-pillar Pod is a single gauge pod that is designed to be installed on virtually any vehicle and will house (1) 2 1/16" (52mm) gauge. Each universal single gauge pod is crafted from...$29.99 -
Coolant Temp Sensor This coolant temperature sensor is a replacement for our LC Pro Fuel Injection Kits. This sensor has 3/8" NPT threads with a GM style weather pack connector. Contact our Tech Support Line for further information at...$29.75 -
LC Engineering Large Decal (26" X 8") Decals increase horsepower! Not really, but you can show the person behind you why you're in front! New limited edition old school Toyota decals. Contact our Tech Support Line for further information at...$29.11 -
Weld On Flat Tab Standard (You Choose Size) TG Weld On Coped Tabs are made from steel, 3/16" thick with a 1/2" diameter hole, and are available in standard or offset. Tabs are coped for either 1 1/2" tubing or 1 3/4" tubing. NOTE: Shipped raw and...$28.23 -
Timing Cover Hardware (Dual Chain Applications) Timing Chain Bolt Kits for the early dual-row cover or the LC Engineering dual row conversion kit. All Hardware is zinc plated, or black oxide coated. This is the hardware used in the Timing Chain...$27.53 -
Wastegate Block Off Plate (CNC Turbo Manifold) This block off plate goes under the CNC Turbo manifold (2) Bolt Style. 3/8" thick Ceramic Coated to handle the heat from our CNC turbo manifold. Contact our Tech Support Line for further information...$26.68 -
2-Bolt Stub Connector (You Choose Size) 2 1/4" Flange This is a 2-bolt collector reducer to allow you to fabricate your own exhaust after our header. Bolts to our street header and has 2.25" stainless steel tubing to weld or clamp to. 2 1/2" Flange This...$26.47 -
Merge Collector (You Choose Size) You've got that header all constructed, now you just need a collector to tie it all together. LC Engineering has already done the work for you, just pick the one for your application, slip it on, and weld it up! These...$26.47 -
Rear Seal Gasket Assembly High-quality silicone seals with a double lip for improved sealing, includes rear main seal & housing gasket. Contact our Tech Support Line for further information at 928-575-2174. Note:...$25.56
-
fast shipping
Speed Delivery